Product data

USRobotics
Command Reference
Data Command Set - 61
Defined Values
<type> An alphanumeric code corresponding to the selected option:
NONE Data compression is not in use. V42B V.42bis is in use in
both directions. ALT MNP 5 compression.
Example +DR: V42B
%C - Enable/Disable Data Compression
Enables or disables data compression negotiation. The modem can only perform
data compression on an error corrected link.
Syntax
%C[<value>]
Defined Values
<value> A decimal number corresponding to the selected option: 0
Disables data compression. 1 Enables both V.42 bis and MNP 5
data compression. 2 Enables both V.42 bis and MNP 5 data
compression. 3 Enables both V.42 bis and MNP 5 data
compression.
(Default.)
Result Codes
OK <value> = 0, 1, 2, or 3.
ERROR Otherwise.
N - Automode Enable
This command is included for compatibility only and has no effect other than
returning a result code. The only valid values are 0-1.
Syntax
N[<mode>]
Defined Values
<mode > Decimal number corresponding to the selected value: 0-1.
Result Codes
OK <mode> = 0 to 1.
ERROR Otherwise.