56K PCI Faxmodem Quick Installation Guide #R24.0661.00 rev 1.2 09/06 #R24.0654.00 rev 1.
Contents I n s t a l l a t i on . . . . . . .. . . . . .. . . . . . .. . . . . .. . . . . . .. . . . . .. . . . . . .. . . . . .. . . . . . . 1 O p e r at i o n s . . . . . . .. . . . . .. . . . . . .. . . . . .. . . . . . .. . . . . .. . . . . . .. . . . . .. . . . . . . 7 T r ou b l e s h oo t i n g . . . . . .. . . . . . .. . . . . .. . . . . . .. . . . . .. . . . . . .. . . . . .. . . . . . . 8 A d d i t i o n a l I n f o r m a t i o n . . . .. . . . . .. . . . . . .. . . . . .. . . . . . .. . . . . ..
Installation Package Contents ! USRobotics 56K PCI ! USRobotics Installation CD-ROM ! Telephone cable ! Quick Installation Guide Faxmodem Physical Features Port Item Function Connects the modem to your telephone line. Connects the modem to your telephone.
Installation Instructions N o te : You may need to be logged in as an administrator on your computer to install your modem. USRobotics recommends uninstalling any other modems that are installed in your system and unplugging all telephone cords connected to these modems. Refer to your previous modem's documentation for instructions. Step One: Physically Install the Modem in the Computer 1. Turn off your computer and all peripheral devices. 2.
1. Plug one end of the telephone cord into the 2. Plug the other end into an analogue phone wall jack. 3. To connect a telephone through the modem, plug the telephone’s cord into the modem’s jack. 4. Plug your computer in, and turn it on. 5. While the computer is booting up, insert the USRobotics Installation CD-ROM. port on the modem.
Windows 2000 N o te : If at any time during the installation you are prompted to select the location of your installation drivers, assuming D: is your CDROM drive, type D:\2000_XP. 1. In the Found New Hardware Wizard on your computer, click Next. 2. Select Search for a suitable driver for my device (recommended) and click Next. 3. Verify that the CD-ROM drive is selected, and click Next. Follow the on-screen instructions to install the U.S. Robotics V.92 PCI Faxmodem.
Windows 98 N o t e : If at any time during the installation you are prompted to select the location of your installation drivers, assuming D: is your CDROM drive, type D:\. 1. In the Add New Hardware Wizard on your computer, click Next. 2. Select Search for the best driver for your device (Recommended) and click Next. 3. Verify that the CD-ROM drive is selected, and click Next. Follow the on-screen instructions to install the U.S. Robotics V.92 PCI Faxmodem Enumerator. 4.
Additional Software Instant Update The Instant Update software automatically notifies you of any available updates for your modem's firmware. To install the Instant Update software: 1. On the USRobotics Installation CD-ROM, select Software. 2. Select Instant Update. 3. Click Install and follow the on-screen instructions to install the Instant Update software. Internet Call Notification Internet Call Notification enables the V.
Operations Using Internet Call Notification If you are connecting to a server that supports V.92:4 1. You will receive a message informing you of an incoming call. In addition, if you subscribe to Caller ID service, the number of the incoming call will display. 2. Click Accept to accept the call, or Ignore to ignore the call. If you choose to accept the call, another message will appear notifying you of the length of time that the provider's system will wait on hold before the data connection is terminated.
Tr oubleshooting Basic Troubleshooting Procedure This procedure addresses a number of symptoms that you might experience with your modem: ! Verify the cables are connected correctly. This includes all cables connecting the telephone line, the modem, and your computer. ! If possible, test your modem with a different phone cord and/or wall jack. If you still have trouble using the modem, follow the procedure below that best describes your symptom. My computer isn’t recognising my modem.
1. Do one of the following: " Windows XP: Click Windows Start > All Programs > Accessories > Communications > Network Connections. " Windows 2000:Click Windows Start > Programs > Accessories > Communications > Network and Dialup Connection. " Windows Me, 98 and 95:Click Windows Start > Settings > Control Panel > Dial-Up Networking. 2. Right-click the connection you are trying to use, and click Properties. 3. Make sure that the description for the modem is U.S. Robotics V.92 PCI Faxmodem.
Voice Mail Users Solution: If you have voice mail provided by your local phone company, your dial tone may be altered when messages are waiting. Retrieve your voice mail to restore your normal dial tone. My modem sounds like it’s trying to connect to another modem but fails. Solution: You may have a poor connection. All calls are routed differently, so try placing the call again. My modem isn’t achieving a 56K Internet connection. Solution: The V.92 and V.
Additional Information For regulatory and warranty information, see the User Guide on the USRobotics Installation CD-ROM. For operation information, see the User Guide on the USRobotics Installation CD-ROM. For troubleshooting and technical support: 1. See the User Guide on the USRobotics Installation CD-ROM. 2. Go to the Support section of the USRobotics Web site at www.usr.com/support/.
Support 1. You can contact the USRobotics Technical Support Department. To receive assistance, you need your serial number. Model Number Serial Number 5660C www.usr.
Pr i n te d i n Xx x x
Pr i n te d i n Xx x x
