Operating instructions

SECTION A: INSTALLING OTHER FAX/DATA/VOICE
SOFTWARE
110
You do not have to use the RapidComm
Voice fax/data/voice software included with
your new Sportster. Your modem has been
designed and tested using a wide range of
communications software packages on the
market. This section will walk you through
some of the details you may need to know
when installing other communications software
packages.
Type of Modem
Most communications software programs will
ask you to select the type of modem you are
using. Select a U.S. Robotics Sportster high
speed modem. If that selection is not listed,
pick Courier Dual Standard, V.32bis, or V.
34.
D KEY POINT: Refer to the manual that
came with your software for its
installation instructions. The software’s
installation program will ask you
questions about the modem you are
using.
Initialization String
For hardware flow control, a fixed serial port
rate and full result codes type:
AT&F1<Enter>
If you must use software flow control, type:
AT&F2<Enter>