Operating instructions

PART III: SECTION B: TROUBLESHOOTING AND ONLINE HELP RESOURCES
117
PROBLEM DIAGNOSIS POSSIBLE SOLUTION
a Errors are
constantly
occurring in
your V.17 fax
transmissions.
a RapidComm Voice
fails to initialize
the modem.
D Your modem initialization
string could be
insufficient for fax
transmissions.
D You could have a disruptive
Terminate and Stay
Resident (TSR) program
running in your
background.
D You could have an
outdated comdriver on
your system.
D Your baud rate may be set
too high.
D RapidComm Voice’s port
settings may be incorrect.
1 Enter the following initialization string in your software
setup screen: AT&H3&I2&R2S7=90.
1 Disable any Terminate and Stay Resident (TSR) programs
running in the background.
1 Load the comdriver that came with your fax software.
This may require you to re-install your internal
modem.
1 Lower baud rate to 9600.
1 Make sure RapidComm Voice’s port settings are correctly
set for your system..