Operating instructions

PART III: SECTION B: TROUBLESHOOTING AND ONLINE HELP RESOURCES
119
Online Help Resources
Connecting to the U.S. Robotics BBS
To connect to the U.S. Robotics Bulletin
Board System, follow these steps:
1. Start RapidComm Voice. The software
settings for the BBS are:
ANSI terminal emulation
Data Bits: 8
Parity: None
Stop Bits: 1
2. Put RapidComm Voice in Terminal mode
by clicking on the Terminal button.
3. Enter the following command: ATDS0
<Enter>
NOTE: ATDSO automatically dials 1-
847-982-5092, the U.S. Robotics BBS.
If this is your first time connecting to our BBS,
you will be asked to enter your name and a
password and to fill out a questionnaire.