User guide

Troubleshooting
58
If you have an IP address that starts with 169.254.xxx.xxx then see
the next section.
If you have another IP address configured, then see section C.
(Windows 98 and Me)To determine your TCP/IP configuration status
please follow the steps below:
1. Click Windows Start and then Run.
2. Type winipcfg and click OK. Select your 802.11g Wireless USB
Adapter and check the IP Address, Subnet Mask, Default
Gateway, and DNS server data to make sure they are correct.
3. If the information is not correct, click Release All and then click
Renew All.
If you have another IP address configured, then see section C.
B. I am getting an IP Address that starts with 169.254.xxx.xxx.
If you are getting this IP address, then you need to check that you are
properly connected to the 802.11g 54Mbps Router.
Confirm that you have a green lit LED on the 802.11g 54Mbps Router
for the port to which this computer is connected. If not, try another
cable.