User guide

Installing the 802.11g 54Mbps Router

INSTALLING THE 802.11g 54Mbps

Router

Basic Installation Procedure

Note: It is important that you have your serial number written down before

you install the 802.11g 54Mbps Router. You can find your serial number on

the bottom label of the 802.11g 54Mbps Router. If you ever need to call our

Technical Support department, you will need this number to receive assis-

tance.

Note: Be sure to find out what letter your CD-ROM drive uses before you

begin installing your new product. You will need to know this to properly

install your software.

Step One: Connect your modem to the 802.11g 54Mbps Router

• Turn off your computer and your cable or DSL modem.

• Locate the Ethernet cable from your cable or DSL modem that is con-

nected to your computer’s Ethernet adapter.

• If your broadband is connected, disconnect that Ethernet cable from your

computer’s Ethernet adapter.

• Use the Ethernet cable to connect your cable or DSL modem to the WAN

port on the rear of the 802.11g 54Mbps Router.

Model Number Serial Number

USR5462