Broadband Router with USB Print Server Quick Installation Guide Guide d'installation rapide Installationsanleitung Guida per l'installazione rapida Beknopteinstallatiegids Guía breve de instalación R24.0513.
Quick Installation Guide ..................................................................1 Guide d'installation rapide .............................................................11 Installationsanleitung .....................................................................21 Guida all'installazione rapida.........................................................31 Beknopte installatiegids .................................................................41 Guía breve de instalación........................
Quick Installation Guide Package Contents: • • • • • Broadband Router with USB Print Server 5.
Feature Function RESET To reset the router to the factory default settings: 1. Unplug the power supply. 2. Press in and hold the RESET button. 3. While holding the RESET button, plug in the power supply. 4. Continue to hold the RESET button until the SYSTEM LED begins flashing.
PC Router Modem LAN 3. WAN Connect the free end of the Ethernet cable to the WAN port on the rear of the router. Analogue or ISDN Modem 1. 2. Turn off your PC and your modem. Locate the serial cable that connects your modem to your PC’s serial port, and disconnect it from the PC only. Do not disconnect the cable from your modem. PC Router Modem WAN LAN 3. Connect the free end of the serial cable to the COM port on the rear of the router.
Analogue or ISDN PC Modem Router WAN LAN 3. 4. Turn on your modem. Connect the supplied power cord to the 5.0 VDC port on the router. Note to UK Users: Replace the plug on power adapter with the UK standard plug that is supplied in your US Robotics package. Apply enough pressure to cause a click and firmly seat the new plug. 5. Plug the power adapter into a standard power outlet. Cable or DSL PC Router Modem LAN WAN Analogue or ISDN PC Modem Router LAN 6. WAN Turn on your PC.
4. Select Wizard from the menu. The Setup Wizard will lead you through the basic router configuration process. If you are unsure about any connection information required by the wizard, contact your ISP. Note: For configuration details and USB printer installation instructions, refer to the User Guide on the U.S. Robotics Installation CD-ROM. 5. Make a backup of your new configuration settings: • Select the Toolbox menu. • Click Backup Setting. • Your system will prompt you to save or open the file.
• Check the IP Address, Subnet Mask, Default Gateway, and DNS server data to make sure they are correct. If the information is not correct, click Release All > Renew All. Windows XP, 2000, and NT Users: • • • • Click Windows Start > Run. Type cmd and click OK. At the DOS prompt, type ipconfig /all and press Enter. Check the IP Address, Subnet Mask, Default Gateway, and DNS server data to make sure they are correct. If the information is not correct: • • Type ipconfig /release and press Enter.
If you have a static IP address, select Static IP Address as the WAN Type in the Web User Interface. My cable or DSL service is not working, but I need to access the Internet. Possible Solution: If you have an external analogue modem and dial-up Internet service, you can still access the Internet. • • • • Connect the external analogue modem according to the procedure described in this guide. Open a Web browser and type http://192.168.123.254 and press Enter to access the Web User Interface.
• For instructions on specifying the IP address manually, refer to the User Guide on the U.S. Robotics Installation CD-ROM. Windows 2000 users: 1. 2. 3. 4. Click Windows Start > Settings, then click Network and Dialup connections. Double-click the Local Area Connections icon and select Properties. Select the TCP/IP line that has been assigned to your network card and select Properties.
I can’t see my USB printer on the network. Possible Solution 1: You did not configure your network for printer access through the router. For complete instructions on installing the printer, including computer configuration, see the printer installation instructions in the User Guide on the U.S. Robotics Installation CD-ROM. Possible Solution 2: Your USB printer may not be compatible with the Broadband Router with USB Print Server.
Country Voice Webmail Netherlands 0900 20 25 857 http://www.usr.com/emailsupport/ea 9:00A.M.–17:00P.M.,M-F Norway +47 23 50 0097 http://www.usr.com/emailsupport/ea 9:00A.M.–17:00P.M.,M-F http://www.usr.com/emailsupport/pl 8:00A.M.–18:00P.M.,M-F Portugal +351 (0)21 415 4034 http://www.usr.com/emailsupport/pt 9:00A.M.–17:00P.M.,M-F Spain 902 117 964 http://www.usr.com/emailsupport/es 9:00A.M.–17:00P.M.,M-F Sweden +46 (0) 77 128 1020 http://www.usr.com/emailsupport/ea 9:00A.M.–17:00P.M.
Guide d'installation rapide Contenu de la boîte : • • • • • Broadband Router with USB Print Server Adaptateur secteur 5 V Câble Ethernet CD-ROM d'installation Guide d'installation rapide Avant VOYANTS Action WAN LINK (Connexion WAN) Allumé Signal Ethernet WAN détecté Clignotant rapidement Envoi ou réception de données sur le WAN WAN 10/100 LAN LINK/ACT (Connexion LAN) LAN 10/100 Fonction Allumé Connexion WAN 100 Mbits/s établie Désactivé Connexion WAN 10 Mbits/s établie Allumé Signal Ethern
Caractéristique Fonction RESET (REINITIALISER) Débranchez l'adaptateur secteur. Tout en maintenant le bouton RESET enfoncé, rebranchez l'adaptateur secteur. Lorsque le routeur est de nouveau sous tension, continuez de maintenir le bouton RESET enfoncé jusqu'à ce que la DEL SYSTEM commence à clignoter. Le routeur reprendra alors les réglages d'usine par défaut.
PC Routeur Modem LAN 3. WAN Connectez l'extrémité libre du câble Ethernet au port WAN situé à l'arrière de votre routeur. Modem analogique ou RNIS 1. 2. Eteignez votre ordinateur et votre modem. Localisez le câble série qui permet de relier votre modem au port série de votre PC, et débranchez-le uniquement de votre PC. Ne le débranchez pas de votre modem. PC Modem Routeur LAN 3. WAN Connectez l'extrémité libre du câble série au port COM situé à l'arrière de votre routeur.
RNIS ou analogique PC Modem Routeur WAN LAN 3. 4. 5. Allumez votre modem. Branchez le cordon d'alimentation fourni dans le port 5 V du routeur Branchez le cordon d'alimentation dans une prise murale d'alimentation standard Câble ou DSL PC Routeur Modem WAN LAN RNIS ou analogique PC Modem Routeur LAN 6. WAN Allumez votre PC. Etape 3 : configurer les paramètres de connexion de base.
Remarque : pour obtenir les informations relatives à la configuration et les instructions d'installation de l'imprimante USB, consultez le guide de l'utilisateur sur le CD-ROM d'installation U.S. Robotics . 5. Effectuez une copie de sauvegarde de vos nouveaux paramètres de configuration : • Sélectionnez le menu Toolbox (Boîte à outils). • Cliquez sur Backup Setting (Enregistrer les paramètres). • Vous serez invité à enregistrer ou à ouvrir le fichier. Sélectionnez Save (Enregistrer), puis cliquez sur OK.
Utilisateurs de Windows XP, 2000 et NT : • • • • Cliquez sur Démarrer > Exécuter. Tapez cmd, puis cliquez sur OK. A l'invite DOS, saisissez ipconfig /all et appuyez sur Entrée. Assurez-vous que les informations d'adresse IP, de masque de sous-réseau, de passerelle par défaut et de serveur DNS sont correctes. Dans le cas contraire : • • Tapez ipconfig /release et appuyez sur Entrée. Tapez ipconfig /renew et appuyez sur Entrée.
• • Si vous avez une adresse IP dynamique, choisissez Dynamic IP Address (Adresse IP dynamique) comme type de WAN dans l'interface utilisateur Web. Le routeur obtiendra automatiquement les informations nécessaires auprès de votre fournisseur d'accès. Si vous avez une adresse IP statique, choisissez Static IP Address (Adresse IP statique) comme type de WAN dans l'interface utilisateur Web. Mon service câble ou DSL ne fonctionne pas mais je dois accéder à l'Internet.
• • Pour obtenir l'adresse IP automatiquement par le biais du serveur DHCP, procédez comme suit : cliquez sur l'onglet Général, sélectionnez Obtenir automatiquement une adresse IP, puis cliquez sur OK deux fois. Il s'agit de la méthode la plus utilisée pour configurer les PC. Pour savoir comment configurer manuellement l'adresse IP, consultez le guide de l'utilisateur du CD-ROM d'installation U.S. Robotics. Utilisateurs de Windows 2000 : 1. 2. 3. 4.
Je ne vois pas mon imprimante USB sur le réseau. Première solution possible : Vous n'avez pas configuré votre réseau pour que votre imprimante puisse y accéder via le routeur. Pour trouver les instructions complètes d'installation de l'imprimante, y compris de la configuration de l'ordinateur, consultez les instructions correspondantes dans le guide de l'utilisateur du CD-ROM d'installation U.S. Robotics.
Pays Téléphone Adresse Web Horaires d'ouverture Pays-Bas 0900 20 25 857 http://www.usr.com/emailsupport/ea De 9h à 17h, du L. au V. Norvège +47 23 50 0097 http://www.usr.com/emailsupport/ea De 9h à 17h, du L. au V. Pologne http://www.usr.com/emailsupport/pl De 8h à 18h, du L. au V. Portugal +351 (0) 21 415 4034 http://www.usr.com/emailsupport/pt De 9h à 17h, du L. au V. Espagne 902 117 964 http://www.usr.com/emailsupport/es De 9h à 17h, du L. au V.
Installationsanleitung Packungsinhalt: • • • • • Broadband Router with USB Print Server Netzkabel (Ausgang: 5,0 V Gleichstrom) Ethernet-Kabel Installations-CD-ROM Installationsanleitung Vorderansicht LEDs WAN LINK WAN 10/100 LAN LINK/ACT (Verbindungsanzeige) LAN 10/100 Vorgang Funktion Leuchtet WAN-Ethernetsignal erfasst Blinkt WAN-Daten senden oder empfangen Leuchtet 100 Mbps WAN-Verbindung hergestellt Aus 10 Mbps WAN-Verbindung hergestellt Leuchtet LAN-Ethernetsignal erfasst Blinkt LAN-Da
Merkmal Funktion RESET Ziehen Sie den Netzstecker. Halten Sie die RESET-Taste gedrückt. Stecken Sie das Netzkabel bei gedrückter RESET-Taste wieder ein. Wenn der Router wieder an den Netzstrom angeschlossen ist, halten Sie die RESET-Taste weiter gedrückt, bis die SYSTEM-LED zu blinken beginnt. Damit stellen Sie die werkseitigen Voreinstellungen des Router wieder her.
PC Router Modem LAN 3. WAN Schließen Sie das nunmehr freie Ende des Ethernet-Kabels an den WAN-Anschluss hinten am Router an. Analog- oder ISDN-Modem 1. 2. Schalten Sie den PC und das Modem aus. Nehmen Sie das serielle Kabel, mit dem das Modem an den seriellen Anschluss des PCs angeschlossen ist, und trennen Sie es vom PC, nicht aber vom Modem. PC Router Modem LAN 3. WAN Schließen Sie das nunmehr freie Ende des seriellen Kabels an den COM-Anschluss hinten am Router an. 2.
Analog oder ISDN PC Modem Router WAN LAN 3. 4. 5. Schalten Sie das Modem ein. Stecken Sie das mitgelieferte Stromkabel in den 5,0-V-Gleichstromanschluss des Routers. Stecken Sie das andere Ende in eine Steckdose. Kabel oder DSL PC Router Modem LAN WAN Analog oder ISDN PC Modem Router LAN 6. WAN Schalten Sie Ihren PC ein. 3. Schritt: Konfigurieren Sie die grundlegenden Verbindungseinstellungen.
Hinweis: Näheres zur Konfiguration und Anweisungen zum Installieren eines USBDruckers finden Sie in der Bedienungsanleitung auf der U.S. Robotics Installations-CDROM. 5. Erstellen Sie eine Sicherungskopie der neuen Einstellungen: • Wählen Sie das Menü Toolbox (Extras). • Klicken Sie auf Backup Setting (Einstellungen sichern). • Sie werden aufgefordert, die Datei entweder zu speichern oder zu öffnen. Wählen Sie Speichern und klicken Sie auf OK.
Unter Windows XP, 2000 und NT: • • • • Klicken Sie auf Start > Ausführen. Geben Sie den Befehl cmd ein und klicken Sie auf OK. Geben Sie an der DOS-Eingabeaufforderung ipconfig /all ein und drücken Sie die Eingabetaste. Überprüfen Sie die Daten für IP-Adresse, Subnetzmaske, Standard-Gateway und DNS-Server. Sind die Informationen nicht korrekt, gehen Sie folgendermaßen vor: • • Geben Sie ipconfig /release ein und drücken Sie die Eingabetaste. Geben Sie ipconfig /renew ein und drücken Sie die Eingabetaste.
• • Wenn Sie eine dynamische IP-Adresse haben, wählen Sie Web-Benutzeroberfläche unter "WAN Type" (WAN-Typ) Dynamic IP Address (Dynamische IP-Adresse). Der Router bezieht die nötigen Informationen dann automatisch vom ISP. Wenn Sie eine statische IP-Adresse haben, wählen Sie auf der WebBenutzeroberfläche unter "WAN Type" (WAN-Typ) Static IP Address (Statische IPAdresse). Mein Kabel- oder DSL-Service funktioniert nicht, doch ich muss auf das Internet zugreifen.
• • So beziehen Sie die IP-Adresse automatisch vom DHCP-Server: Klicken Sie auf die Registerkarte "Allgemein", wählen Sie IP-Adresse automatisch beziehen und klicken Sie auf OK > OK. Dies ist das bevorzugte Verfahren bei der Konfiguration von PCs. Eine Anleitung zur manuellen Eingabe der IP-Adresse finden Sie in der Bedienungsanleitung auf der U.S. Robotics Installations-CD-ROM. Unter Windows 2000: 1. 2. 3. 4.
Mein USB-Drucker taucht im Netzwerk nicht auf. Lösungsvorschlag 1: Sie haben das Netzwerk nicht so eingestellt, dass über den Router auf den Drucker zugegriffen werden kann. Ausführliche Anweisungen zum Installieren des Druckers einschließlich der entsprechenden Computereinstellungen finden Sie in der Bedienungsanleitung auf der U.S. Robotics Installations-CD-ROM. Lösungsvorschlag 2: Ihr USB-Drucker ist möglicherweise mit dem Broadband Router with USB Print Server nicht kompatibel.
Land Telefon E-Mail Öffnungszeiten Irland +44 870 844 4546 http://www.usr.com/emailsupport/uk Mo – Fr, 9:00 – 18:00 Uhr Ortszeit Italien 848 80 9903 http://www.usr.com/emailsupport/it Mo – Fr, 9:00 – 17:00 Uhr Luxemburg +352 342 080 8318 http://www.usr.com/emailsupport/bn Mo – Fr, 9:00 – 17:00 Uhr Naher Osten/Afrika +44 870 844 4546 http://www.usr.com/emailsupport/me Mo – Fr, 9:00 – 17:00 Uhr Ortszeit Niederlande 0900 20 25 857 http://www.usr.
Guida all'installazione rapida Contenuto della confezione: • • • • • Broadband Router with USB Print Server Alimentazione 5,0 V CC Cavo Ethernet CD-ROM di installazione Guida all'installazione rapida Visuale frontale LED WAN LINK WAN 10/100 LAN LINK/ACT LAN 10/100 Printer Azione Funzione Acceso Segnale Ethernet WAN rilevato Lampeggiante Invio o ricezione di dati WAN Acceso Collegamento WAN a 100 Mbps Spento Collegamento WAN a 10 Mbps Acceso Segnale Ethernet LAN rilevato Lampeggiante Invio o
Elemento Funzione RESET Scollegare l'alimentatore. Tenere premuto il tasto RESET. Tenendo premuto il tasto RESET, ricollegare l'alimentatore. Una volta ricollegata l'alimentazione di router, tenere premuto il tasto RESET finché il LED SYSTEM (Sistema) non inizia a lampeggiare. In questo modo verranno ripristinate le impostazioni predefinite di router.
PC Router Modem LAN 3. WAN Collegare l'estremità libera del cavo Ethernet alla porta WAN sul retro del router. Modem analogico o ISDN 1. 2. Spegnere il PC e il modem. Individuare il cavo seriale che collega il modem alla porta seriale del PC, quindi scollegarlo da quest'ultimo. Non scollegare il cavo dal modem. PC Router Modem LAN 3. WAN Collegare l'estremità libera del cavo seriale alla porta COM sul retro del router. Fase 2. Collegare il router al computer e all'alimentatore. 1. 2.
Connessione analogica o ISDN PC Modem Router WAN LAN 3. 4. 5. Accendere il modem. Collegare il cavo di alimentazione in dotazione alla porta 5.0 VDC del router. Inserire il cavo di alimentazione in una presa di corrente standard. Connessione via cavo o DSL PC Router Modem WAN LAN Connessione analogica o ISDN PC Modem Router LAN 6. WAN Accendere il PC. Fase 3. Configurare le impostazioni di connessione di base.
Nota: per informazioni relative alla configurazione e all'installazione della stampante USB, fare riferimento alla Guida utente del CD-ROM di installazione U.S. Robotics. 5. Eseguire un backup delle nuove impostazioni di configurazione: • Selezionare il menu Toolbox (Strumenti). • Fare clic su Backup Setting (Impostazione backup). • Il sistema richiede di salvare o aprire il file. Selezionare Save (Salva) e fare clic su OK.
Utenti di Windows XP, 2000 e NT • • • • Fare clic su Start > Esegui... Digitare cmd e fare clic su OK. Al prompt di DOS, digitare ipconfig /all e premere Invio. Controllare che l'indirizzo IP, la subnet mask, il gateway predefinito e i dati del server DNS siano corretti. Se le informazioni non sono corrette: • • Digitare ipconfig /release e premere Invio. Digitare ipconfig /renew e premere Invio.
• • Se si possiede un indirizzo IP dinamico, selezionare Dynamic IP Address (Indirizzo IP dinamico) come tipo di WAN nell'interfaccia utente Web; il router otterrà automaticamente le informazioni necessarie dal provider di servizi. Se si possiede un indirizzo IP statico, selezionare Static IP Address (Indirizzo IP statico) come tipo di WAN nell'interfaccia utente Web. Il servizio via cavo o DSL non funziona, ma si deve accedere a Internet.
• • Per ottenere l'indirizzo IP automaticamente tramite il server DHCP: Fare clic sulla scheda Generale, selezionare Ottieni automaticamente un indirizzo IP, quindi OK > OK. Questo è il metodo preferito per la configurazione dei PC. Per ulteriori informazioni sull'immissione manuale dell'indirizzo IP, è inoltre possibile fare riferimento alla Guida utente del CD-ROM di installazione U.S. Robotics Utenti di Windows 2000 1. 2. 3. 4. Fare clic su Start > Impostazioni, quindi su Rete e connessioni remote.
La stampante USB non è visualizzata in rete. Soluzione possibile 1 La rete non è stata configurata per l'accesso della stampante dal router. Per informazioni relative alla configurazione e all'installazione della stampante, fare riferimento alla Guida utente del CD-ROM di installazione U.S. Robotics. Soluzione possibile 2 La stampante USB non è compatibile con Broadband Router with USB Print Server. Alcune stampanti, comprese la stampanti solo per Windows (o Win-Printers) non funzionano con questo router.
Paese Telefono Sito Web Medio Oriente e Africa +44 870 844 4546 http://www.usr.com/emailsupport/me 9:00 – 17:00, lun-ven Orario Paesi Bassi 0900 20 25 857 http://www.usr.com/emailsupport/ea 9:00 – 17:00, lun-ven Norvegia +47 23 50 0097 http://www.usr.com/emailsupport/ea 9:00 – 17:00, lun-ven http://www.usr.com/emailsupport/pl 8:00 – 18:00, lun-ven Polonia Portogallo +351 (0)21 415 4034 http://www.usr.com/emailsupport/pt 9:00 – 17:00, lun-ven Spagna 902 117 964 http://www.usr.
Beknopte installatiegids Inhoud verpakking: • • • • • Broadband Router with USB Print Server Stroomtoevoer: 5,0 VDC Ethernet-kabel Installatie-cd Beknopte installatiegids Vooraanzicht Lampjes WAN LINK WAN 10/100 LAN LINK/ACT LAN 10/100 Printer Status Functie Aan WAN Ethernet-signaal gedetecteerd Knippert Er worden WAN-gegevens verzonden of ontvangen Aan 100 Mbps WAN-verbinding opgezet Uit 10 Mbps WAN-verbinding opgezet Aan LAN Ethernet-signaal gedetecteerd Knippert Er worden LAN-gegevens ve
Onderdeel Functie RESET Stroomtoevoer afsluiten RESET-knop indrukken en vasthouden. Sluit de stroomtoevoer aan terwijl u de RESET-knop ingedrukt houdt. Wanneer de router weer is aangesloten, houdt u de RESET-knop vast totdat het SYSTEM-lampje begint te knipperen. De fabrieksinstellingen worden dan hersteld.
Pc Router Modem LAN 3. WAN Sluit het vrije uiteinde van de Ethernet-kabel aan op de WAN-poort aan de achterzijde van de router. Analoge modem of ISDN-modem 1. 2. Schakel uw pc en modem uit. Zoek de seriële kabel waarmee de modem is aangesloten op de seriële poort van uw pc en koppel deze los van uw pc. Koppel de kabel niet los van uw modem. Pc Router Modem LAN 3. WAN Sluit het vrije uiteinde van de seriële kabel aan op de COM-poort aan de achterzijde van de router.
Analoog of ISDN Pc Modem Router WAN LAN 3. 4. 5. Schakel uw modem in. Sluit het meegeleverde netsnoer aan op de 5,0-VDC poort op de router. Sluit het netsnoer aan op een gewoon stopcontact. Kabel of DSL Pc Router Modem WAN LAN Analoog of ISDN Pc Modem Router LAN 6. WAN Schakel uw pc in. Stap 3: Configureer de standaard verbindingsinstellingen.
Opmerking: raadpleeg voor configuratie-informatie en installatie-instructies voor USBprinters de Gebruikshandleiding op de U.S. installatie-cd. 5. Een back-up maken van uw nieuwe configuratie-instellingen: • Selecteer het menu Toolbox (Werkset). • Klik op Backup Setting (Back-upinstelling). • Het systeem vraagt u het bestand op te slaan of te openen. Selecteer Save (Opslaan) en klik op OK. • Blader naar de locatie waar u het back-upbestand wilt opslaan en klik op Save (Opslaan).
Gebruikers van Windows XP, 2000 of NT: • • • • Klik in Windows op Start > Uitvoeren. Typ cmd en klik op OK. Typ ipconfig /all achter de DOS-prompt en druk op Enter. Controleer of het IP-adres, het subnet-masker, de standaard gateway en de DNSservergegevens correct zijn. Als dat niet het geval is: • • Typ ipconfig/release en druk op Enter. Typ ipconfig/renew en druk op Enter. Mogelijke oplossing 4: U dient de verbindingsinstelling van uw webbrowser te controleren.
• • Als u een dynamisch IP-adres hebt, selecteert u Dynamic IP Address (Dynamisch IPadres) als WAN-type in de webinterface. De router vraagt de vereiste informatie dan automatisch op bij uw internetprovider. Als u een statisch IP-adres hebt, selecteert u Static IP Address (Statisch IP-adres) als WAN-type in de webinterface. Mijn kabelservice of DSL-service functioneert niet, maar ik heb toegang tot internet nodig.
• • Zo kunt u het IP-adres automatisch verkrijgen via de DHCP-server: Klik op het tabblad Algemeen, selecteer Automatisch een IP-adres verkrijgen en klik op OK > OK. Dit is de beste methode voor het configureren van pc's. Raadpleeg voor instructies over het handmatig opgeven van IP-adressen de Gebruikshandleiding op de U.S. installatie-cd. Gebruikers van Windows 2000: 1. 2. 3. 4. Klik in Windows op Start > Instellingen en klik vervolgens op Netwerk- en inbelverbindingen.
Ik zie mijn USB-printer niet op het netwerk. Mogelijke oplossing 1: U hebt uw netwerk niet geconfigureerd voor printertoegang via de router. Raadpleeg voor volledige instructies over het installeren van de printer, inclusief de configuratie van de computer, de printerinstallatie-instructies in de Gebruikshandleiding op de U.S. installatie-cd. Mogelijke oplossing 2: Uw USB-printer is mogelijk niet compatibel met de Broadband Router with USB Print Server.
Land Voice Webmail Midden-Oosten/ Afrika +44 870 844 4546 http://www.usr.com/emailsupport/me 9:00 uur – 17:00 uur, m-v Nederland 0900 20 25 857 http://www.usr.com/emailsupport/ea 9:00 uur – 17:00 uur, m-v Noorwegen +47 23 50 0097 http://www.usr.com/emailsupport/ea 9:00 uur – 17:00 uur, m-v Polen Openingstijden http://www.usr.com/emailsupport/pl 8:00 uur – 18:00 uur, m-v http://www.usr.
Guía breve de instalación Contenido de la caja: • • • • • Broadband Router with USB Print Server Fuente de alimentación de 5.
Elemento Función RESET Desenchufe la toma de corriente Mantenga pulsado el botón RESET (Reinicio). Mientras pulsa RESET (Reinicio) desconecte y vuelva a enchufar a la toma de corriente. Cuando el router vuelve a recibir corriente, siga pulsando el botón RESET (Reinicio) hasta que el led SYSTEM se ponga a parpadear. De esta manera, el router recuperará la configuración establecida de fábrica.
PC Router Módem LAN 3. WAN Conecte el extremo libre del cable Ethernet al puerto WAN situado en la parte posterior del router. Módem analógico o RDSI: 1. 2. Apague el PC y el módem. Busque el cable de serie que conecta el módem al puerto de serie del PC y desconéctelo únicamente del PC. No desconecte el cable del módem. PC Router Módem LAN 3. WAN Conecte el extremo libre del cable de serie al puerto COM situado en la parte posterior del router.
Analógico o RDSI PC Módem Router WAN LAN 3. 4. 5. Encienda el módem. Conecte el cable de alimentación suministrado al puerto 5.0 VDC del router. Enchufe el cable de alimentación a una toma de corriente estándar. Cable o DSL PC Router Módem LAN WAN Analógico o RDSI PC Módem Router LAN 6. WAN Encienda el PC.
Notas: Si desea obtener información e instrucciones acerca de la instalación de la impresora USB, consulte la Guía del usuario que encontrará en el CD de instalación de U.S. Robotics. 5. Haga una copia de seguridad de los nuevos parámetros de configuración: • Seleccione el menú Toolbox (Herramientas). • Haga clic en Backup Setting (Copiar configuración). • El sistema le indicará que debe abrir o guardar el fichero. Seleccione Save (Guardar) y pulse OK (Aceptar).
Si es usuario de Windows XP, 2000 o NT: • • • • Haga clic en el botón de Windows Inicio, Ejecutar. Escriba cmd y haga clic en Aceptar. En la ventana del DOS, escriba ipconfig /all y pulse Intro. Compruebe que la dirección IP, la máscara de subred, la puerta de enlace predeterminada y los datos del servidor DNS son correctos. Si no lo son, • • escriba ipconfig /release y pulse Intro. A continuación, escriba ipconfig /renew y vuelva a pulsar Intro.
• • Si tiene una dirección IP dinámica, marque la opción Dynamic IP Address (Dirección IP dinámica) como WAN type (Tipo de WAN) en la interfaz Web del usuario, y el router obtendrá automáticamente la información que necesita de su proveedor. Si tiene una dirección IP estática, marque la opción Static IP Address (Dirección IP estática) como WAN type (Tipo de WAN) en la interfaz Web del usuario. Mi conexión por cable o DSL no funciona, pero necesito conectarme a Internet.
• • Para obtener la IP automáticamente mediante el servidor DHCP: Haga clic en la ficha General , Seleccione Obtener una dirección IP automáticamente, haga clic en Aceptar y vuelva a pulsar Aceptar. Se recomienda este método para la configuración de equipos. Encontrará instrucciones sobre cómo indicar la dirección IP manualmente en la Guía del usuario del CD de instalación de U.S. Robotics. Si es usuario de Windows 2000: 1. 2. 3. 4.
No veo la impresora USB en la red. Solución posible 1: No ha configurado la red para acceder a la impresora a través del router. Para encontrar información detallada acerca de la instalación y configuración de la impresora, consulte el apartado correspondiente de la Guía del usuario del CD de instalación de U.S. Robotics. Solución posible 2: Cabe la posibilidad de que la impresora USB no sea compatible con el Broadband Router with USB Print Server .
País Teléfono Dirección del sitio Web Horario de asistencia Francia 082 507 0693 http://www.usr.com/emailsupport/fr De 9:00 a 17:00, de lunes a viernes Alemania 01805671548 http://www.usr.com/emailsupport/de De 9:00 a 17:00, de lunes a viernes Hungría 01805671548 http://www.usr.com/emailsupport/hu De 9:00 a 17:00, de lunes a viernes Irlanda +44 870 844 4546 http://www.usr.com/emailsupport/uk De 9:00 a 17:00, de lunes a viernes Italia 848 80 9903 http://www.usr.
Printed in Taiwan.