Installation guide

What You Need to Begin

• PC with an Ethernet adapter (NIC) installed

• A functioning Ethernet-based cable or DSL modem

an RS-232-based analogue or ISDN modem and an RS-232 cable

• Operating System installation CD-ROM

• Internet Explorer 5.0 or later

Netscape 7.0 or later

• Your CD-ROM drive letter (for example, D)

• Your router product number and serial number, located on the bottom label of the router. If

you ever need to call our Technical Support department, you will need this number to

receive assistance.

Router Installation

The U.S. Robotics Broadband Router with USB Print Server can easily be connected to any Ether-

net-based cable or DSL modem, or an RS-232 based analogue or ISDN modem.

Note: For the most updated information, visit: http://www.usr.com/support

You can also refer to the

User Guide

on the U.S. Robotics Installation CD-ROM for more

detailed information.

Step 1: Connect your modem to the router.

Cable or DSL Modem

1. Turn off your PC and your modem.

2. Locate the Ethernet cable that connects your modem to your PC’s Ethernet adapter, and dis-

connect it from your PC only: do not disconnect the cable from your modem.

RESET To reset the router to the factory default settings:

1. Unplug the power supply.

2. Press in and hold the RESET button.

3. While holding the RESET button, plug in the power supply.

4. Continue to hold the RESET button until the SYSTEM LED begins flashing.

COM To connect an analogue or ISDN modem

PRINTER To connect a USB printer to the LAN

LAN ports 1-4 To connect devices to the LAN

WAN RJ-45 port to connect a broadband modem

Product Number Serial Number

8001

Feature Function