Instructions / Assembly

Thank you and we hope to hear from you soon,
Your friends and neighbors at,
US.SHOVEL
USSHOVEL.COM
07.08.2020
US.SHOVEL
Assembly Instructions for BR18SMM, BR18SMF & BR18SMR Models.
Hello,
We thank you for selecting your USSHOVEL broom. Assembly
is minimal and can be easily done by following the few simple
steps below:
Components List:
1. 2-Handed Hand-grip
2. Handle
3. Broom head
4. Screws - Phillips head
Assembly:
1. To attach handle to the broom head.
a) Completely insert and thread handle into broom
head.
2. To attach your Hand-grip to handle.
a) Completely insert handle into Hand-grip as shown in
Fig 1
b) Place broom on a flat non-abrasive surface to align
Hand-grip and broom head as shown in Fig. 1 & 2.
3. To attached Support Brackets follow instructions packaged
with brackets and as shown in Fig 3.
Maintenance:
1. Check all fasteners at frequent intervals for proper
tightness to be sure the broom is in safe working condition.
2. Do not use broom if any component becomes damaged.
Proper use:
Your US.SHOVEL broom provides you power, comfort
and back-pain relief like no other broom can.
a) The Hand-grip allows you to maintain an upright
neutral spine reducing or eliminating lower back
pain. There is no need to bend at the waist to push
your broom forward.
b) The Hand-grip accommodates both hands for
greater control leading to less physical exertion
and greater comfort.
Contact Info:
For assistance or comments please feel free to reach us
at - https://www.usshovel.com/contacts
Fig 1.
Fig 2.
Fig 3.