US Sporting Goods, Inc. MODEL SUNPA (12, 16, 20, 28 GA and .410 Bore) Pump Action Shotgun WARNINGS AND INSTRUCTION MANUAL USSG, Inc. 411 Hawk Street Rockledge, Florida 32955 (321) 639-4842 www.ussginc.com E-mail: ussg@eaacorp.
USSG, INC. MODEL SUNPA PUMP ACTION SHOTGUN WARNINGS AND INSTRUCTION MANUAL PLEASE READ THESE INSTRUCTIONS MODEL NUMBER BARREL LENGTH EZPA 18.5", 20", 24",26", 28", 30",32" TYPE PUMP ACTION SHOTGUN GAUGES 12, 20, 16, 410, 28 FINISH BLUE, CAMO GENERAL INFORMATION: Weight (average) - 28" = 7.5 Lbs.
WARNING **YOU RISK PERSONAL INJURY OR DEATH BY HANDLING THIS FIREARM** Before handling any firearm, make sure you know the safety procedures and most importantly, keep the firearm pointed in a safe direction. Before handling this firearm, read, understand and follow the instructions in this manual. Always keep this manual with the firearm. If you lend, give or sell this firearm, be sure the manual goes with it.
NOTICE SHOTGUNS ARE CLASSIFIED AS FIREARMS OR DANGEROUS WEAPONS and are sold by USSG INC. with the specific understanding that we are not responsible in any manner whatsoever for their safe handling or resale under local laws and regulations. USSG INC.
FOLLOWING THESE SAFETY RULES CAN SAVE YOUR LIFE OR THE LIFE OF SOMEONE ELSE Get instructions from a competent firearms instructor before using this or any firearm. Learn from a professional how to handle, load, unload, operate, fire and care for your gun. NEVER PLAY with your firearm. It is not a toy and can be a very dangerous weapon that can cause serious personal injury or death. Always keep the gun pointed in a safe direction. Treat every gun as if it is loaded...all the time.
FOLLOWING THESE SAFETY RULES CAN SAVE YOUR LIFE OR THE LIFE OF SOMEONE ELSE Be careful with ALL ammunition. Even “blank” cartridges are deadly at close range due to the muzzle blast. Make sure your ammunition is new and in good clean condition. Do NOT oil or grease ammunition as this may damage the cartridge primer. Do NOT tamper with or alter the standard factory ammunition. Keep firearms unloaded when not actually in use.
FOLLOWING THESE SAFETY RULES CAN SAVE YOUR LIFE OR THE LIFE OF SOMEONE ELSE Teach children: 1. NOT to touch guns, bullets, cartridges, shells, flares or any explosive device and 2. That if they discovery such a dangerous item or weapon, they must immediately report its location to their parents, school teacher or police. Remember a firearm has the capability of taking your life or the life of someone else.
WARNING If there is any reason to suspect that a projectile is obstructing the barrel, immediately unload the firearm (See Unloading Instructions) and check the chamber and the bore. A wad, shot or some other matter may be lodged some distance down the barrel where it can not easily be seen. Check the bore by using a cleaning rod to pass through the barrel.
Directions for Assembly WARNING: Read and understand all instruction and warnings in this manual BEFORE using this shotgun. 1. Remove the stock/action from the box and remove the plastic covering. (Fig.1) Remove the barrel from inside the box and remove its plastic covering and check to make sure the barrel is clear. Fig. 1 2. Remove the magazine tube cap. 3. Remove the cardboard tubes on the magazine. The tubes are there to protect the action bar in shipment. (Fig.2) 4.
SAFETY The Safety Button is set through the trigger guard and can easily be activated or deactivated by pushing it until flush with one side or the other. When the safety is flush with the right side of the trigger guard, the safety is disengaged and there is a red ring visible on the base of the safety on the left side of the trigger guard (Fig.
FIRING WARNING: Read and understand all instructions and warnings in this manual BEFORE using this shotgun. It is important to learn the parts of your shotgun and their functions before using this firearm. Keep the muzzle pointed at your target. Be aware of what is behind or around your target as well as the target itself. After you have cycled the action and loaded a shell into your pump shotgun, the gun is ready to fire.
You can remove the magazine tube plug for cleaning by: 1. Taking a screwdriver to the mag tube plug. 2. Push down. 3. Turn the mag plunger 1/8 turn clockwise and carefully release. (Fig. 11) CAUTION: The magazine tube is under spring pressure! Further disassembly is not recommended and not necessary for regular maintenance. REASSEMBLE To reassemble the shotgun, first cock the hammer on the trigger assembly. To cock the hammer, pull down on the hammer until it locks into place. 1.
MANUFACTURER’S WARNING: This firearm was manufactured to properly perform with the original parts as designed. It is your duty to make sure any parts you buy are correctly installed and that neither replacements nor originals are altered or changed. Your gun is a complex tool with many parts that must relate correctly to other parts for safe and accurate operation. Putting a gun together wrong or with modified parts can result in a damaged gun, or personal injury or death to you or others.
DANGER — AMMUNITION WARNING Firearms may be damaged and serious personal injury or death to the shooter or bystanders may result from any condition which contributes to the generation of excessive pressure or uncontrolled release of gas within the firearm. Such adverse conditions can be caused by bore or chamber obstructions, propellant powder overloads or by defective, incorrect or improperly loaded and assembled cartridge components.
To obtain warranty performance send your firearm with proof of retail purchase, freight prepaid to: USSG INC. 411 HAWK St Rockledge, FL 32955 NOTICE: It is illegal to ship a firearm with ammunition in the firearm or in the same packaging. Firearms and ammunition must be shipped separately. For information about shipping ammunition, call USSG INC. at (321) 639-4842. WARNING—ALTERATIONS OR MODIFICATIONS Altering or modifying parts and/or internal safeties is dangerous and will void the warranty.
CHOKE TUBES WARNING. Never install or remove choke tubes while the firearm is loaded. Only install or remove choke tubes with the firearm unloaded, the action open and the trigger block safety engaged. WARNING! MAKE SURE YOU FULLY TIGHTEN THE CHOKE TUBE Shooting with a loose choke tube can cause damage to your shotgun. Additional information on screw choke tubes: A) Only tighten or loosen choke tubes with flat key wrench supplied with shotgun.
E) Before using the shotgun make sure that the choke tubes are installed correctly. F) Keep choke tubes lubricated and installed. Never fire the gun without a choke tube installed. Handle choke tubes carefully since the leading edge is very thin.
Model SUNPA PARTS EXPLOSION Need Parts Explosion 18
Model SUNPA PARTS LIST 1 2 3 4 5 5a 6 8 9 10 11 12 13 14 15 16 17 18 19 23 24 25 26 27 28 29 30 31 32 33 34 Recoil Pad Screw (2) Recoil Pad Stock Assembly Stock Screw Stock Screw Washer Stock Screw Lock Washer Receiver Magazine Tube Feed Latch Feed Latch Spring Feed Latch Pin (2) Feed Latch Pin Detent Spring (2) Interceptor Latch Interceptor Latch Spring Magazine Follower Magazine Spring Magazine Spring Retainer Forend Assembly Magazine Cap Trigger Plate Trigger Plate Pin Bushing Trigger Plate Pin Detent S
YOUR OWNER’S MANUAL Always keep this manual with your firearm. Make sure you understand all the warnings, operation instructions and safety procedures. When you lend, give or sell the firearm, be sure this manual goes with it. You can get a copy of this manual from USSG INC. upon request. ALL PARTS ORDERS ARE SUBJECT TO A $10.00 CHARGE FOR SHIPPING AND HANDLING. Please state Model, Caliber, Serial Number, and Finish Color when ordering. For parts, information and service contact: USSG INC.
