Installation Guide

-7-
ASSEMBLY INSTRUCTIONS
NOTICE: United States Stove Company grants no warranty, stated or implied, for the installation or maintenance
of your wood stove and assumes no responsibility of any incidental or consequential damages.
1. Uncrate the stove and remove packing
materials and protective poly bag. (save
cardboard box for further assembly.)
2. Remove parts from inside of stove. Parts include:
one feed door, four legs, hardware pack, ue
collar, hearth plate, and bottom air channel.
3. Place attened carton on oor and carefully
turn stove over onto carton.
4. Attach bottom air channel with four (4) 1/4-20 X
3/8" screw, and four (4) washers.
REQUIRED MATERIALS
Note: the following items are not included with your
stove
Flooring protector as specied
Chimney Connector
1/2" Sheet Metal Screws
Chimney
Furnace Cement
REQUIRED TOOLS
• Safety Glasses
• Hearth Gloves
• Pencil
• 6' Folding Ruler or
Tape Measure
• Tin Snips
• Drill
• 1/8" dia. Drill Bit
• Adjustable Wrench
• (Sheet Metal Screws)
• #2 philips screw
driver
CAUTION: STOVE IS HEAVY. MAKE SURE YOU
HAVE ADEQUATE HELP AND USE PROPER LIFTING
TECHNIQUES WHENEVER MOVING STOVE.
6. Attach the front legs to hearth with two (2) 1/4-20
x 1-3/4 screws, two (2) at washers, and two (2)
1/4-20 jam nuts.
7. Attach the rear legs to base of stove with two (2)
1/4-20 x 1-3/4 screws, two (2) at washers, and
two (2) 1/4-20 jam nuts.
8. Carefully lift stove upright and place in desired
location (see following instructions for properly
locating stove.)
KEY PART NO. DESCRIPTION QTY.
1 83658 1/4-20 X 1-3/16 Flathead Phillips Screw 4
2 83563 1/4-20 X 3/4 Flt Hd Ph Mach 4
3 83659 1/4-20 X 1-3/4 Flt Hd Ph Screw 4
4 83336 1/4-20 Jam Nut 10
5 83278 7/32 Id X 1/2 Od X 3/64 Fl W 10
5. Attach hearth to bottom of stove with two (2)
1/4-20 x 1-3/16 screws, two (2) washers, and two
(2) 1/4-20 jam nuts.
9. Lower feed door into position while aligning hinge
pins.