Installation Guide

3
Tools and Materials Needed
TOOLS
• Pencil
• 6 Foot Folding Rule or Tape Measure
• Drill, Hand or Electric
• Drill Bit 1/8" Dia. (For Sheet Metal Screws)
• 5/16" Nut Driver or 5/16" Socket w/Ratchet
• Screw Driver (Blade-Type)
• Gloves
• Safety Glasses
MATERIALS
• 6" Pipe, 6" Elbow, Collar and Thimble; As Required
(24 gauge min.)
• 1/2" Sheet Metal Screws (No. 10A x 1/2")
• 6" Inside Diameter Underwriters Laboratories (UL)
Listed Residential Solid Fuel Factory-Built Triple
wall Chimney or Exiting Masonry Chimney.
• Floor Protector Material As Specied in this
manual.
• Furnace Cement (Manufacturer Recommends:
Rutland Black Code 78 or Equivalent)
(SIDE VIEW)
(FRONT VIEW)
(TOP VIEW)
DO NOT BURN:
• Residential or commercial garbage;
• Lawn clippings or yard waste;
• Materials containing rubber, including tires;
• Materials containing plastic;
• Waste petroleum products, paints or paint
thinners, or asphalt products;
• Materials containing asbestos;
• Construction or demolition debris;
• Paper products, cardboard, plywood, or
particleboard. The prohibition against burning
these materials does not prohibit the use of re
starters made from paper, cardboard, saw dust,
wax and similar substances for the purpose of
starting a re in unaffected wood heater.
• Railroad ties or pressure-treated wood;
• Manure or animal remains;
• Salt water driftwood or other previously salt
water saturated materials;
• Unseasoned wood;
• Any materials that are not included in the
warranty and owner’s manual for the subject
wood heater; or
• Any materials that were not included in the
certication tests for the subject wood heater.