Installation Guide

40314

SHAKER GRATE

United States Stove Company

227 Industrial Park Rd. • South Pittsburg, TN 37380 853550

ITEM USED ON DESCRIPTION

40314

1600 series furnaces

1800 series furnaces

Cast iron Construction

For use with Wood & Coal

WARNING:

Allow the stove to cool before carrying out any maintenance or cleaning.

STEP 1

Open the ash door and remove the ashpan. After

removing the ashpan, remove the nut and bolt that

attaches the shaker grate assembly to the shaker

pivot weldment.

SHAKER GRATE REMOVAL

Shaker Grate

Grate Frame

Connecting Bar

PAGE 1
40314 SHAKER GRATE WARNING: Allow the stove to cool before carrying out any maintenance or cleaning. ITEM 40314 USED ON 1600 series furnaces 1800 series furnaces DESCRIPTION Cast iron Construction For use with Wood & Coal SHAKER GRATE REMOVAL Shaker Grate Grate Frame Connecting Bar STEP 1 Open the ash door and remove the ashpan. After removing the ashpan, remove the nut and bolt that attaches the shaker grate assembly to the shaker pivot weldment.
PAGE 2
STEP 2 Open the feed door to remove the shaker grate assembly. When removing the assembly lift the back end of the assembly up first. This will allow the handle of the connecting bar to be removed from the ash door STEP 3 Once removed, place the shaker grate assembly onto a suitable surface that will not be damaged. Remove the nuts and bolts that secure the shaker grates to the connecting bar. Note: Then nuts and bolts are located on the bottom of the shaker grate assembly.