Use and Care Manual
4
Installation
1. Garbage;
2. Lawn clippings or yard waste;
3. Materials containing rubber, including tires;
4. Materials containing plastic;
5. Waste petroleum products, paints or paint thinners, or
asphalt products;
6. Materials containing asbestos;
7. Construction or demolition debris;
8. Railroad ties or pressure-treated wood;
9. Manure or animal remains;
10. Salt water driftwood or other previously salt water
saturated materials;
11. Unseasoned wood; or
12. Paper products, cardboard, plywood, or particleboard.
The prohibition against burning these materials does
not prohibit the use of re starters made from paper,
cardboard, saw dust, wax and similar substances for
the purpose of starting a re in an affected wood heater.
This heater is designed to burn only PFI Premium grade pellets. This appliance can also burn pellets rated as standard
after May 16, 2015
DO NOT BURN:
Burning these materials may result in release of toxic fumes or render the heater ineffective and cause smoke.
SAFETY AND EPA COMPLIANCE
Your pellet stove has been safety tested and listed to ASTM E 1509-04, ULC-S627-00, ULC/ORD C1482-90 and (UM) 84-
HUD by OMNI-Test Laboratories, Inc. Portland, Oregon, USA. It is also certied and tested to EPA Phase II requirements.
INSTALLATION OPTIONS
Read this entire manual before you install and use your pellet stove. Failure to follow instructions
may result in property damage, bodily injury, or even death!
Warning: Use all specied components and make no substitutions unless approved by the
manufacturer. Failure to do so may result in property damage, bodily injury, or even death!
(See specic installation details for clearances and other installation requirements)
A Freestanding Unit—supported by pedestal/legs and placed on a non-combustible oor surface in compliance with
clearance requirements for a freestanding stove installation.
An Alcove Unit—supported by pedestal/legs and placed on a non-combustible oor surface in compliance with clearance
requirements for an alcove installation.
Your pellet stove may be installed to code in either a conventional or mobile home (see SPECIAL MOBILE HOME
REQUIREMENTS). US Only Installation.
It is recommended that only a authorized technician install your pellet stove, preferably an NFI certied specialist.
CAUTION: DO NOT CONNECT TO OR USE IN CONJUNCTION WITH ANY AIR DISTRIBUTION DUCTWORK UNLESS
SPECIFICALLY APPROVED FOR SUCH INSTALLATIONS.