Installation Guide

80314
F120 Therm-O-Disc
United States Stove Company
227 Industrial Park Rd. • South Pittsburg, TN 37380 853588
The F120 Therm-O-Disc will automatically turn your circulation blowers on once the stove is up
to temperature.
1. Disconnect power from the stove.
2. Remove the screws securing the thermodisc cover to the back of the stove.
3. Disconnect the wires attached to the thermodisc.
4. Take out the two screws holding the thermodisc to the back of the stove.
5. Reverse the previous steps to reinstall the new thermodisc.
• Blower temperature switch for Furnaces
• Allows Automatic blower activation at 120°F
WARNING:
Allow the stove to cool before carrying out any maintenance or cleaning.