Specifications

PART # DESCRIPTION
Aqua Flo 475 Series Drinking Water Systems
20010023 475 PRO Series RO system
20010024 475 PRO Series RO system w/BP
20010025 475 PRO Series RO system (Air gap faucet)
20010026 475 PRO Series RO system w/BP (Air gap faucet)
Replacement Filters & RO Membrane
65010086 SED-10 (Sediment Filter - 5 Micron)
65010088 COC-10 Coconut Carbon (Pre & Post 10 Micron)
70010014 RO Membrane 75 GPD TFC
65010087 CB-10 Carbon Block (Oponal Filter - 10 Micron)
65010089 GAC-10 Granular Carbon (Oponal Filter)
Feed Water Guidelines
Maximum TDS 2000 ppm
Hardness <7gpg
Iron (Fe) <0.2ppm
Manganese (Mn) <0.05ppm
Hydrogen Sulde 0.0ppm
Turbidity <1.0NTU
Feed Water Pressure 40-100psi
Temperature 40-100°F
pH Range 3.0-11.0
Aqua Flo Platinum 1240 Series
Conditions for Use
Notes:
• 1 Pressure Regulator is recommended for feed water pressures exceeding 552 kPa (80 psig).
• The performance of a reverse osmosis membrane is highly dependent upon pressure, temperature and TDS. The actual volume of product water and rejecon
percentage will vary with dierences from the test condions that membrane rangs are based upon.
• These drinking water systems are not intended to be used for the treatment of water that is microbiologically unsafe or of unknown quality.
• Storage tank capacity is dependent on pressure. Example: with a 7 psi precharge, the drawdown volume is 2.16 gal at 60 psi, 1.79 gal at 40 psi for the storage
tank shown.
• This product is manufactured under one or more of the following U.S. patents: 5,045,197; 5,057,212; 5,221,473
“
Raises the water
pressure and maintains
it at the ideal level ...
”
Booster Pump ( R/O feed water line
booster pump)
Raises the water pressure and maintains it at the ideal level
for the system to operate at maximum eciency. Rec-
ommended for use on supplies with low pressure or high
concentrations of total dissolved solids (TDS). The pump is
self-priming and whisper-quiet. It runs on a 24VAC trans-
former (included) from a standard 120VAC electrical outlet.
System includes: Flexible mounting plate, quick connect
ttings and a pressure shut-o switch.
Item #: 70030001
Model: RO Booster with Pressure Switch and
Transformer for 25 to 75 Gallon per
day Systems
Change lters in
seconds without
turning o water!
No tools required!
Booster
Pump
Model
Aqua Flo Reverse Osmosis Systems
Fast, Simple & Sanitary
Maintenance!
Quick connect disposable cartridges and
membrane make for easy ‘Do-It-Yourself’
maintenance. With built in auto water shut-os
there is no need to turn o the water supply
prior to maintenance.
Because traditional systems require the
disinfection of the permanent housing canisters
and involve more direct human contact,
maintenance can take as much as an hour
and if not done properly can result in a
contaminated system.
Disposable cartridges changes in seconds and
reduce contamination risk!
Features:
0 Four stage ltration: 5 micron sediment pre-lter, 10
micron coconut carbon pre & post lters, quick
connect 75 GPD NSF Certied TFC membrane
0 Bayonet-style 1/4 turn quick connect disposable
cartridges with auto water shut-o
0 Includes faucet and 3.0 gallon NSF Certied storage
tank. (Designer faucets available)
0 3/8” tubing for high product ow rate from tank to
faucet
0 Quick connect ttings, inlet saddle and drain saddle,
labelled tubing for easy installation
0 Booster pump model with inlet solenoid raises water
pressure to ideal level for maximum eciency.
Recommended on rural supplies with low pressure
or high TDS
0 Two year warranty (excluding consumable lter
cartridges and RO membrane)
0 Dimensions:
13”w x 141/2”h x 41/2 d No Pump
141/4”w x 161/2”h x 61/4”d Pump Model
52 53
Drinking Water Systems