Specifications

PURA
Ultraviolet
Disinfection
Systems
Item # Model
92325 KF - BOOSTER PUMP - MD1050
92317-1 AQUATEC MODEL PAB8800 BOOSTER PUMP
92341 AQUATEC MODEL PD5800 DEMAND PUMP
70030035 RO-75 BOOSTER PUMP
RO Booster Pumps
PAB8800 Series High Flow Booster Pump
Key Operaonal Benets:
0 Boosts pressure 40 to 120 psi (adjustable)
0 Used with membranes 50 to 120 GDP
0 15,000+ operang hours (esmated)
0 Quiet – less than 52 DBA
0 Can run dry without damage
Aquatec 5800 Demand Pump
OPERATION: The 5800 pump can draw water from a holding
tank and pressurize it, or boost the pressure from a low pressure
source. They are designed to operate intermiently, but most
versions can run connuously for several hour intervals. The
pumps can be operated in demand mode controlled by an
integral pressure switch, or in delivery mode controlled by an
external power switching device. An integral bypass may be used
to limit pressure.
POWER: 115V PSI: 60 GPM: 0.9
MOUNTING: A steel mounng base with four hollow rubber
grommets is standard and included at no extra cost. The pump
may be mounted in any posion.
FITTINGS: The 5800 pump is oered with integral John Guest
style quick connect ng for 3/8” OD semi rigid tubing.
KemFlo MD1050 Booster Pump
DESCRIPTION: 110/230 VAC, 75 GPD Booster pump 1.0 L.min,
suitable for applicaons with 24VDC transformer
SPECIFICATIONS: Kemo MD Series booster pump with 3/8”
FNPT, made from NSF grade material high power ow rate and
quality.
Meet ROHS standard.
Features:
0 Toughest, most durable pump on the market
0 Adjustable max. outlet psi (regardless of feed
pressure)
0 Expels trapped air (no more air locks)
0 Can be mounted with pump head up or
horizontal
0 More ow at extremely low inlet pressures
0 New motor venng system to remove moisture
0 EMI/RFI electronic noise suppression
0 100% nal performance tested
0 Available in 12VDC and 24VDC
58 59
Drinking Water Systems Drinking Water Systems