Owner's Manual

~~~~
l
~ifi~fi@ii~f1
t1n
raiji~
aisRI~I:
Since
the
BT45-FORD1
is
using the
SATELLITE
function
of
your Ford
radio,
the
option
to
see
the song
title, artist name and
Album
title
is
available. While your music
plays,
short-press the
TEXT
button
repeatedly
to
cycle
between the
different
TEXT
fields
(i.e. artist,
album
and song). The default
text
display
is
song-title.
Note:
some radios have the
TEXT
option on preset number
6.
Pressing
and holding
down the
TEXT/PRESET-6
button
for
too
long will result
in
the
BT45FORD1
switching into
AUX
mode.
i
jl,g
liJi
llllll
!!
ll·~
~
~~~
~
~
Note: the DOWN
position
of
the dipswitches
=
ON
and
the
UP
position =
OFF.
Make sure
all
the dip-switches are set
to:
the
Bll!llllrlli!IJiil
positio_
n.
3
•
Eject
all
CO's
from
the
COG
radio mechanism
to
prevent
jamming
the
CD
mechanism
when
the
radio reboots.
• Disconnect the negative battery terminal
for
safety purposes
only.
• Remove
the
radio and disconnect
all
the plugs, locate the 16-pin
Satellite radio
plug
found on
the
back part
of
the radio-chassis.
•
Use
the
BT-F24C
cable (included in package)
to
connect the
male 16-pin and 24-pin connectors
of
the
BT-F24C
harness
into
the
radio.
• Reconnect the factory 16-pin and 24-pin plugs into
the
female
16-pin and 24-pin plugs
of
the
BT-F24C
harness.
•
Run
the
BT-F24C
3.5' long cable
to
the
desired mounting
location, preferably
an
easily accessible one.
• Connect
the
18-pin
black Molex
of
the
BT-F24C
cable
into
the
BT45-FORD1
plug labeled "RADIO".
• Connect
the
included
microphone
to
the
"MIC" jack
of
the
BT45-FORD1
and run
the
5-meter long cable
to
any
of
the