User Manual

17 18
• My hands-free phone call volume is very low.
First adjust the phone volume se ng to MAX, then use the
radio volume controls to adjust it to the desired level.
• IMy radio has a SAT/XM bu on but it is not displaying any music
info such as song  tles.
Confi rm that your device is equipped with Bluetooth profi le
AVRCP 1.4 or higher, it has iOS 6.0 or higher, or Android 4.0 or
higher.
Music streaming apps’ info display capabili es vary thus some
might not display properly on your radio.
• I'm unable to use my steering wheel controls to answer calls or
control media playback.
The steering wheel control in XM1 audio source is designed to
perform PRESET changes thus it CAN NOT be used to answer
calls or to change tracks during media streaming.
In some vehicles you might be able to preform those func ons
by press and hold the steering wheel control's TUNE UP/DOWN
bu on.
* If steering wheel control feature is important to you then you
can use the CDC audio source for Bluetooth. (you'll need to
make changes to the dip switch se ngs and cable connec ons).
However by using it in CDC source you will lose the music info
display feature.
• The BT45’s USB port will not charge my device.
Please use data SYNC and CHARGE (USB 2.0 capability) cables.
Not all USB cables on the market support charging.
• I have a device connected through BT45’s AUX input and the
volume is very low.
Turn the volume on the actual device to MAX then use the
radio’s volume control to adjust the level.
For help with any additional issues, please contact tech support at
[phone] Mon-Fri: 9am-5pm PST
or e-mail us at [e-mail]
Additional troubleshooting Q&A are available at
http://www.usaspec.com/t-faq.aspx
AUX input
Aux 3.5 mm Audio Input
• You'll need a 3.5mm to headphone jack cable (not included
in this package)
Maximum charging output: 2.1 amps at 5 volt
(charging cable not provided)
1. Press the AUX button
2. Press the PRESET 6 button
to access the audio device
connected to the AUX port
1. Press the AUX button
2. Press the DISC 6 or DISC 9
button to access the audio
device connected to the AUX
port
USB charging port
• I can hear the XM radio and media streaming playing at the same
 me.
Make sure you have disconnected the CAS-H3t cable. DO NOT
Use the CAS-H3t cable if you are connec ng through the XM
tuner (p.6).
Make sure the dip switches are set correctly (p.5).
• The BT45-HON3 is connected through the radio but the XM bu on
on the radio does not work?
Make sure the CAS-H3t cable is connected to the CAS-H3x cable
(see p.8).
• I’m unable to pair my smartphone/device.
1. Forget/delete the BT45-HON from your phone's Bluetooth
se ng. Reset your phone and try the pairing process again.
2. If you have an Android device, make sure the “Only visible to
paired devices” op on is UNCHECKED. Some mes it can take
up to 30 seconds for the BT45 to be detected by your
smartphone/device.
Troubleshooting