User Manual

7 8
Installation Instruction A: Connecting
through the XM Tuner
Diagram A
Installation
Instruction A:
Connecting through
the XM Tuner
Disconnect the
CAS-H3t cable from the
CAS-H3x cable.
DO NOT use the
CAS-H3t cable
Install the microphone
See p. 6 for recommended
locations
Follow Diagram A
on p. 8
Locate the XM tuner
See p. 3-4 for
XM tuner location
Pair your Bluetooth
device (phone). See
p. 10 for instructions
Learn about audio
streaming, hands-free
phone call, and
AUX port on p. 11-13
Make sure you have
completed all of the above
steps and have made a
couple of test calls before
putting your car
back together
Install the BT45 interface
module in an easily
accessible location
See p. 17 for some
common troubleshooting
Q & A
18 pin male
XM TUNER*
CAS-H3X
TO RADIO
14-pin male
14-pin female
BT45 Interface Module
DO NOT use the CAS-H3t cable if connecting through the XM tuner
CAS-H3t
Factory XM Cable Unplug the 14-pin factory cable from the XM tuner * The above depiction of the XM tuner is a generalized depiction, the tuner in your vehicle will look similar but not exactly the same. Please look for an unoccupied 14-pin port or unplug the factory cable that’s occupying the 14-pin port.