Owner's Manual

9
BLUETOOTH SETUP
Bluetooth Device Pairing Instructions
1. Turn your vehicle's ignition ON and make sure the radio is
turned on
2. Press the "PRESET A/B/C " to select PRESET A
3. Press the SAT(XM) or RADIO button until you reach the SAT
radio source
4. Press & hold the PRESET 4 soft key until it beeps to set
PRESET 4 as Bluetooth source
5. Press & hold the PRESET 6 soft key unit it beeps to set
PRESET 6 as AUX input source
6. Enable the Bluetooth function on your phone
7. Scan/search for available devices from your phone. It may
take up to 30 seconds for your phone to locate the BT45
8. Select BT45-NIS from the list of available devices your phone
has detected.
9. Allow the pairing process to take place
10. Once pairing is complete you will hear the "CONNECTED"
voice prompt from your vehicles' audio system and the radio
will briefly display the name of your phone, i.e. USA SPEC
TEST PHONE
• Step 4-5 is to program PRESET A's #4 & #6 to give you
an easy access to Bluetooth and BT45' AUX input. The
remaining PRESETS will remain as they are.
1. Press the SAT(XM) or RADIO button to cycle through the
audio sources until you reach the Bluetooth source. For
Altima radios press the CD/MP3 button.
2. Or if you are in PRESET A, select PRESET 4 for Bluetooth
source
Switching Audio Source: from AM/FM, CD, to
Bluetooth Source