Owner's Manual

11
PHONE CALLS
Answer and End Calls
When there is an incoming call:
1. You must manually switch to Bluetooth (SAT) audio source
first
2. Once you are in the Bluetooth source (SAT), you will hear
the caller's number announced through the vehicle's sound
system (you will hear "PRIVATE" if caller ID is not available). If
the voice prompt features is disabled, then you will only hear
the phone's ringtone. See p.12 on how to enable/disable the
voice prompt feature.
Answer Calls
1. From the radio: turn the TUNE knob to the right or press the
SEEK/TRACK UP button
2. From the steering wheel
(*)
: Push the ENTER switch up for
more than 1.5 seconds
End or Reject Calls
1. From the radio: turn the TUNE knob to the left or press the
SEEK/TRACK DOWN button
2. From the steering wheel
(*)
: push the ENTER switch down for
more than 1.5 seconds
3. Once a call has ended, the radio will remain in the Bluetooth
source (XM1), you must manually select the source you wish
to go back to
(*) In some vehicles the steering wheel control functions might
not work when in Bluetooth source