Owner's Manual
Table Of Contents
CONNECTING
& PLAYING
of
iPod
in
DIRECT
MODE
When the
iPod
is
connected
to
the adapter, the
iPod
's screen will go blank for few seconds before the
nonnal screen returns. The audio
of
iPod
music will be played back at DISC 5 and Track I.
Adjust VOLUME, BASS, TREBLE and etc. as you would nonnally do for the other program sources
on the radio.
CONNECTING & PLAYING of
iPod
in
HYBRID MODE
5-1 Connecting
iPod
to the interface
After connection, the
iPod
will take a few moments
to
change
to
external control mode.
5-2 Select
iPod
mode on GM radio
Press "DISC" or "BAND" button, depending on the setting
of
the DIP switches made at Step I
of
installation, until
"CD6 TRK-x" appears on the radio display (x is the track number
of
"Now Playing" song on
iPod).
This display
confirms that
iPod
mode has been completely synchronized and activated. Synchronization timing varies according
to the number
of
Playlists on your
iPod.
If
iPod
was playing previously before radio or ACC power was OFF, and the
iPod
was not disconnected, playback
resumes from where it was stopped.
5-3 Disconnecting
iPod
from the interface
If
the
CD
changer control
is
selected, the radio will automatically switch to AM/FM mode when
iPod
is
disconnected from adapter.
If
the
XM
control
is
selected, the radio will stay at XM band and
displays"
iPod
" when
is
disconnected from adapter.
After disconnecting,
iPod
screen changes from the external control mode screen back to the
nonnal
menu. Pressing
and holding the PlaylPause button on
iPod
may get the normal
iPod
menu back faster.
5-4 Playback
of
songs on
iPod
All audio tracks on your
iPod
will be played (All play)
at
DISC
6.
Track order
is
determined by the default order
on
your
iPod.
Selecting DISCI to DISC 5 on radio will allow playback
of
5 Playlists on
iPod.
Every time when
iPod
is
connected
to
the interface adaptor, the playback starts from "Now Playing" song at DISC
6 by default.
If
iPod
was playing any
of
its Playlist right before the connection, the same Playlist will continue to
play and repeated at disc 6 but I
iPod
will switch to "All" as soon as fast forward button
is
pressed.
5-5 Selecting a Playlist
Press radio preset button "5" button to select a Playlist. The selected Playlist will begin playing and the Playlist
number and track number will be displayed. In rare cases, this may take up to few seconds for the completion
of
synchronization. After playing the last song in the current Playlist, playback will start again from the first track
of
this Playlist.
Playlist naming
• When
iPod
is connected
to
your radio via PA
ll-GM
interface adaptor, the adaptor scans all available Playlists
on
iPod
and looks for designated GM Playlists which are created for direct access with DISC buttons on
GM
radio. The designated GM Playlists are related to DISC number in the following manner:
DISC
1:
GMl...
DISC
2:
GM2 .
DISC 3: GM3 .
DISC 4:
GM4
.
DISC
5:
GM5 .
DISC
6:
ALL SONGS on
iPod
The naming
of
designated OM Playlists in iTune for
PAll-OM
interface must be exactly as shown.
OM must be in capital letters and there can be no spaces between OM text and number.
o