Owner's Manual
Table Of Contents
;;Iectioi;:~"
CONNECTING
& PLAYING
of
iPod
in
DIRECT
MODE
When
the
iPod
is
connected the adapter, iPod's screen will go blank for few seconds before the normal
screen returns. Press CD/A
UX
button
on
your radio, the audio
of
iPod
music will be played back at
DISC 5 and Track
1.
Adjust VOLUME, BASS,
TREBLE
and etc. as you would normally do for the
other program sources on the radio.
$ei:itiii~il~
CONNECTING & PLAYING
of
iPod
in HYBRID MODE
5-1
Connecting
iPod
to the interface
After connection, the
iPod
will take a few moments to change to external control mode.
5-2 Select
iPod
mode on
Honda
radio
Press
CD/AUX
(or, CD/CHG) button on radio repeatedly to go to
CD
Changer mode and
"CD06 TRK-x" appears on the radio display (x is the track number
of
"Now
Playing" song on iPod).
This display confinTIs that
iPod
mode has been completely synchronized and activated.
Synchronization timing varies according to the
number
of
Playlists on your
iPod
.
If
iPod
was playing previously before radio
or
ACC
power
was OFF, and the
iPod
was not
disconnected, playback resumes from where it was stopped.
5-3 Disconnecting
iPod
from the interface
If
your
iPod
is disconnected during playback in
iPod
mode, the radio will automatically switch to
AM/FM
mode.
After disconnecting,
iPod
screen changes from the external control
mode
screen
back
to the nonTIal
menu. Press and hold the Play/Pause button on
iPod
may
get the
nonnal
menu
back
faster.
5-4
Playback
of
songs on
iPod
All audio tracks on your
iPod
will be played (All play) at DISC 6. Track order
is
determined by the
default order on your
iPod.
Selecting DISC I to DISC 5 on radio will allow playback
of
5 Playlists
on iPod. Every time when
iPod
is connected to the interface adaptor, the playback starts from "Now
Playing" song at DISC 6 by default.
If
iPod
was playing any
of
its Playlist right before the connection,
the same Playlist will continue to play and repeated at disc 6 but
iPod
will switch to "All" as soon as
fast forward button
(~~
) is pressed.
5-5 Selecting a Playlist
While in
CD
mode, press
DISC(/\)
or
DISC(V) button (on some radio models, a DISC is selected
through the six "radio station preset buttons") to select a Playlist. The selected Playlist will begin
playing and the Playlist number and track number will be displayed.
In
rare cases, this may take up
to few seconds for the completion
of
synchronization.
After playing the last song
in
the current Playlist, playback will start again from the first track
of
this
Playlist.
o