Quick Setup Guide UBHS-H5
Quick Setup Guide UBHS-H5 Features Power ON / OFF, Talk Volume Up / Down Play / Pause, EQ-Mode Built-In Microphone Next / Previous
Quick Setup Guide UBHS-H5 Power ON/OFF ▮ Press and hold ‘Power/Talk’ button for 2 seconds to switch the headset on or off. ▮ Power ON/OFF voice prompt is “Hello” Hello / “Bye” Bye . Pairing and Connection ▮ While the headset is off, press and hold ‘Talk’ for 4 seconds to start pairing mode. ▮ Once the headset is in pairing mode, select ‘UBHS-H5’ among discovered Bluetooth devices on the phone. When being connected , voice prompt is “Connected”.
Quick Setup Guide UBHS-H5 Easy pairing ▮ ‘UBHS-H5’ supports easy pairing . When pairing , there is no need to enter the ‘0000’. ※ Host device also has to support easy pairing. Connecting the Headset ▮ Connecting from the phone: Among registered Bluetooth devices on the phone, select ‘UBHS-H5’. ▮ Connecting from the headset: Through auto-connect function, the headset automatically connects to the last device it was connected to when powered on.
Quick Setup Guide UBHS-H5 Multi Point ▮ Multi-point enables your headset to maintain an active connection with two mobile phones. This means your headset is ready when you want to make or take calls from either your personal or your work phone phone. ▮ Before setting up multi-point mode, at least one other Bluetooth enabled device should be stored in the headset's pairing list. ▮ The headset will recognize the Bluetooth devices based on priority.
Quick Setup Guide UBHS-H5 Listening to music To: Play/Pause Select a song Answer a call while playing music Change the volume Do this: 1. Press ‘▶■’ button to launch the phone’s MP3 player and to start listening to music. 2. While MP3 player is in use, press ‘▶■’ button to pause or p y to resume play. 3. Double Click ‘▶■’ button to end music playback. While MP3 player is in use, press ‘◀◀’ or ‘▶▶’ buttons to select songs. 1. When receiving a call, press ‘Talk’ button to answer the call. 2.
Quick Setup Guide UBHS-H5 Supports battery status notification at smart phone ▮ iOS Battery Meter
Quick Setup Guide UBHS-H5 How to pairing the UBHS-H5 ▮ Computer running Windows 7 : Note: Before you pair the headset with the computer, make sure the computer is equipped with a Bluetooth radio. Refer to the computer’s documentation or contact the computer manufacturer f t for f more information. i f ti If you do d nott have h a Bluetooth Bl t th radio, di install i t ll a Bluetooth Bl t th USB adapter (dongle). 1 Turn on Bluetooth on the computer.
Quick Setup Guide UBHS-H5 How to pairing the UBHS-H5 ▮ Computer running Windows Vista : Note: Before you pair the headset with the computer, make sure the computer is equipped with a Bluetooth radio. Refer to the computer’s documentation or contact the computer manufacturer for more information. information If you do not have a Bluetooth radio, radio install a Bluetooth USB adapter (dongle). 1 Turn on Bluetooth on the computer.
Quick Setup Guide UBHS-H5 How to pairing the UBHS-H5 ▮ Computer running Windows XP : Note: Before you pair the headset with the computer, make sure the computer is equipped with a Bluetooth radio. Refer to the computer’s documentation or contact the computer manufacturer for more information. If you do not have a Bluetooth radio, install a Bluetooth USB adapter (dongle). 1 Turn on Bluetooth on the computer. For instructions, see the computer’s documentation or contact the computer manufacturer.
Quick Setup Guide UBHS-H5 How to pairing the UBHS-H5 ▮ Mac computer : Note: Before you pair the headset with the computer, make sure the computer is equipped with a Bluetooth radio. Refer to the computer’s documentation or contact the computer manufacturer for more information. information If you do not have a Bluetooth radio, radio install a Bluetooth USB adapter (dongle). 1 Turn on Bluetooth on the computer. For instructions, see the computer’s documentation or contact the computer manufacturer.
Quick Setup Guide UBHS-H5 FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Quick Setup Guide UBHS-H5 IMPORTANT NOTE: FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. “This device complies with Industry Canada licence-exempt RSS standard(s).
Quick Setup Guide UBHS-H5 LED light messages Headset Status LED Status Power on Blue LED flashes Turning off Recharging Red LED dims and disappears Red LED blinks every 5 seconds on connection state Red LED stays on Recharging complete Blue LED stays on Pairing mode Blue and Red LEDs flash in rotation Connection complete Blue LED blinks every 5 seconds Receiving a call Blue LED blinks every 0 0.
