User's Manual

How to pairing the UBHS-H5
Quick Setup Guide UBHS-H5
▮ Mac computer :
Note: Before you pair the headset with the computer, make sure the computer is equipped
with a Bluetooth radio. Refer to the computer’s documentation or contact the computer
manufacturer for more information If you do not have a Bluetooth radio install a Bluetooth
manufacturer
for
more
information
.
If
you
do
not
have
a
Bluetooth
radio
,
install
a
Bluetooth
USB adapter (dongle).
1 Turn on Bluetooth on the computer. For instructions, see the
computer’s documentation or contact the computer manufacturer.
2 Click the Bluetooth status menu.
3 Click Set up Bluetooth Device. The Bluetooth Setup Assistant opens.
4 Click Continue.
5 Select Headset as the device type, then click Continue.
6 With the headset turned off, press and hold Talk for six seconds. The
LED blinks blue and red rapidly and pairing mode is activated.
7 Select UBHS-H5, then click Continue. The computer gathers
information.
CC
8
C
lick
C
ontinue.
9 Click Quit when finished.
Note: To use the headset, it must be selected as the default input and output device on
the computer.
10 Click System Preferences, then click Sound.
11 Under Input, select UBHS-H5, then under Output, select