User's Manual

How to pairing the UBHS-H5
Quick Setup Guide UBHS-H5
▮ Computer running Windows Vista :
Note: Before you pair the headset with the computer, make sure the computer is equipped
with a Bluetooth radio. Refer to the computer’s documentation or contact the computer
manufacturer for more information If you do not have a Bluetooth radio install a Bluetooth
manufacturer
for
more
information
.
If
you
do
not
have
a
Bluetooth
radio
,
install
a
Bluetooth
USB adapter (dongle).
1 Turn on Bluetooth on the computer. For instructions, see the
computer’s documentation or contact the computer manufacturer.
2 Double-click the Bluetooth icon in the system tray, near the clock.
3 Click Add Wireless Device.
4 With the headset turned off, press and hold Talk for six seconds. The
LED blinks blue and red rapidly and pairing mode is activated.
5 Double-click the UBHS-H5 icon on the computer or highlight the icon
and click Next.
6 Click Close after the headset has been paired.
Note: The headset should be automatically selected as the default playback device If the
Note:
The
headset
should
be
automatically
selected
as
the
default
playback
device
.
If
the
headset is not the default playback device, complete Steps 7 through 9.
7 Click Start, then click Control Panel.
8 Click Hardware and Sound, then under Sound, click Manage audio
device.
9 On the Playback tab, select Headset 2-Bluetooth Hands-free Audio,
then click Set Default.
10 On the Recording tab, select Headset Microphone 2-Bluetooth
Hands-free Audio, then click Set Default.
11 Click OK.