User's Manual

ManualsBrandsUsafe ManualsAudio EquipmentBLUETOOTH STEREO HEADSET

Table Of Contents

UBHS-NE1A Headset Quick Start Guide

Connecting the Headset

Connecting from the phone: Among registered Bluetooth devices on the phone,

select ‘UBHS-NE1A’

Connecting from the headset: Through auto-connect function, the headset automatically connects

to the last device it was connected to when powered on.

Microphone

|◀◀ / ▶▶|

buttons

Left/Right Receivers

Volume Control

buttons

USB Port

Power & Talk

Button

Play/Pause button

Pairing

While the headset is off, press and hold ‘Talk’ for 6 seconds to start pairing mode.

Once the headset is in pairing mode, select ‘UBHS-NE1A’ among discovered Bluetooth devices

on the phone and enter the password ‘0000’ to pair the headset.

When being connected , voice prompt is “Connected”.

Easy Pairing

UBHS-NE1A supports easy pairing . When pairing , there is no need to enter the ‘0000’.

※

Host device also has to support easy pairing.

Power On/Off

Press and hold ‘Power/Talk’ button for 3 seconds to switch the headset on or off.

Power On/OFF voice prompt is “Hello” / “Bye”.

Summary of content (6 pages)

PAGE 1
UBHS-NE1A Headset Quick Start Guide Play/Pause button Volume Control buttons Microphone Power & Talk Button |◀◀ / ▶▶| buttons Left/Right Receivers USB Port Pairing While the headset is off, press and hold ‘Talk’ for 6 seconds to start pairing mode. Once the headset is in pairing mode, select ‘UBHS-NE1A’ among discovered Bluetooth devices on the phone and enter the password ‘0000’ to pair the headset. When being connected , voice prompt is “Connected”. Easy Pairing UBHS-NE1A supports easy pairing .
PAGE 2
Multi Pairing Multi Pairing Method 1. All Bluetooth devices to be used in multi pairing must be first paired individually using appropriate profiles. (HSP or HFP for phone conversation, and A2DP for high quality audio) ※Each profile cannot be used to connect more than one device simultaneously. See ‘Notice’ below for more details. ※The auto connect function of the headset will connect each profile to the last connected device. 2. Once the host devices are paired, connections can be made by: a.
PAGE 3
Making Phone Calls Voice dial: Press the ‘Talk’ button once to activate voice dial. ※ Some phones might not support this function. Last Number Redial: Double click ‘Talk’ button to redial last number. Answer a call: When receiving a call, press ‘Talk’ button to answer the call. Ending a call: While talking on the phone, press ‘Talk’ button to end the call. Call Refuse: While receiving a call, press ‘Play/Pause’ button to refuse the call. Volume Control: Use ‘+’ / ’-’ buttons to adjust the volume level.
PAGE 4
3D Sound Using 3D Sound 5 types of 3D sound effect are programmed in the order below. While in Play/Pause mode, double click the ‘▶■’ button to select the 3D sound effect of your choice. Types of 3D Sound Effect 1. Normal: No 3D sound effect is applied. ※ Two beeping sound will indicate that the headset is in Normal mode. 2. Provides comfortable and persistent listening environment by taking distractible sound away from ears and head when using earphones. 3.
PAGE 5
LED Light Messages Headset Status LED Status Powering on Blue LED light is on Powering off Red LED light dims and disappears Low battery Red LED light continues to blink Recharging Red LED light stays on Recharging complete Blue LED lights stays on Pairing Mode Blue and Red LED lights flash rapidly Connection complete Blue LED light blinks every two seconds Receiving a call Blue LED light flashes rapidly Talking on the phone Blue LED light repeatedly brightens and dims Playing music Blu
PAGE 6
FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.