User's Manual

This module is intended for OEM integrators under the following conditions:
FCC: This module is certified pursuant to two Part 15 rules sections (15.247).
Canada/ISED: This module is certified pursuant to RSS-247 rules sections.
This module has been approved to operate with the antenna types listed below, with the maximum
permissible gain indicated, and must include 0.5 dB cable loss compensation.
FCC, ISED Antenna Information
Technology
Frequency Band
Antenna Type
Model Number
Gain (dBi)
Wi-Fi
2400-2483.5MHz MONOPOLE ANT-2.4-CW-RAH -2.4
BT
The OEM integrator is still responsible for
1. ensuring that the end-user has no manual instructions to remove or install module
2. the FCC/ISED compliance requirement of the end product, which integrates this module.
Information on test modes and additional testing requirements
1. This module is restricted to integration into hosts for indoor use only.
2. This module has been approved under stand-alone configuration.
3. OEM integrator has be limited the operation channels in channel 1-11 for 2.4GHz band.
4. The separate approval is required for all other operating configurations, including portable
configurations with respect to Part 2.1093 and different antenna configurations
5. The information on how to configure test modes for host product evaluation for different
operational conditions for a stand-alone modular transmitter in a host, versus with multiple,
simultaneously transmitting modules or other transmitters in a host can be found at KDB
Publication 996369 D04.
Additional testing, Part 15 Subpart B disclaimer
Appropriate measurements (e.g. 15 B compliance) and if applicable additional equipment
authorizations (e.g. SDoC) of the host product to be addressed by the integrator/manufacturer.
This module is only FCC authorized for the specific rule parts 15.247 listed on the grant, and the host
product manufacturer is responsible for compliance to any other FCC rules that apply to the host
product as being Part 15 Subpart B compliant.
NCC Statement
1. 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、
加大功率或變更原設計之特性及功能。
2. 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即
停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通
信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
3. 本模組於取得認證後將依規定於模組本體標示審驗合格標籤，並要求平台廠商於平台上標
示「本產品內含射頻模組
CC XX xx LP yyy Z z 」。
4. 「本公司於說明書中提供所有必要資訊以指導使用者/安裝者正確的安裝及操作」。