User's Manual

All rights are reserved by USI. No part of this technical document can be reproduced in any form
without permission of USI.
WM-BAC-AT-49 module, Wi-Fi/Bluetooth RF user manual, revision 1.0 Page 3
1. Introduction
The WM-BAC-AT-49 combo module is one of the product families in USI’s product offering, targeting
for system integration requiring a smaller form factor. It also provides the standard migration to high
data rate for USI’s current SIP customers.
The purpose of this document is defined the product specification for 802.11a/b/g/n/ac Wi-Fi with
BT5.1 combo module. All the data in this document is based on Qualcomm QCN7606 datasheet and
other documents provided from Qualcomm. The data will be updated after implementing the
measurement of the module.
This product is designated for using in embedded applications mainly in the IoT device, which required
small size and high data rate wireless connectivity.
1.1 Brief Technology Features
 Full IEEE 802.11a/b/g/n/ac legacy compatibility.
 Support 20, 40 and 80MHz channels for the 2x2 5GHz radio, and 20 MHz channels for the 2x2
2.4GHz radio.
 Lead Free design which supporting Green design requirement, RoHS Compliance, and halogen-
free.
 Small size suitable for low volume system integration. Low power consumption & excellent power
management performance extend battery life.
 2.412-2.484 GHz and 5.15 -5.9GHz two SKUs for worldwide market.
 Easy for integrating into IoT device with flexible system configuration and antenna design.
1.2 Wireless Specification
The WM-BAC-AT-49 module complies with the following features and standards;
Features
Description
WLAN Standards
IEEE 802 Part 11a/b/g/n/ac
Bluetooth
Bluetooth TM 5.1 compliance
Antenna Port
Support 2 streaming antennas
1. a single Dual-Band Antenna Port for Wi-Fi on WL_ANT1
2. a single Dual-Band Antenna Port for Wi-Fi on WL_ANT2
3. a single-Band Antenna Port for BT
Frequency band
2.412 to 2.462GHz (1 to 11 channels )
5.180 to 5.825GHz