User guide

6
Audio: Model/type, IP Address, port and security information per device type.
Projector: Model/type, IP Address, port and security information per device type.
Media: Model/type, IP Address, port and security information per device type.
Automation: Model/type, IP Address, port and security information per device type.
Macros: Model/type, IP Address, port and security information per device type.
Caption: Model/type, IP Address, port and security information per device type.
Log Out: Directs you back to the Login screen.
Submenu Screen Selection
The submenu allows the user to apply configuration
and settings to all screens or a single one. By default
the menu is All Screens. Note that the submenu
doesn’t appear for the RTP-100 menu item.
Save Buttons
Every configuration section has a save button that is activated when a field or value is changed. You
must select the save button in each section before leaving that screen. Note that navigating to a
different screen without clicking the save button will result in the losing changes.
RTP-100 Configuration
The RTP-100 menu item provides access to the Ethernet, Wireless, Location and Passcode settings.
Ethernet Configuration
The first section of this screen is for configuring the RTP Ethernet settings. The user settings are, IP Address,
Network Mask, Gateway, and Broadcast. Be sure to click the SAVE button at the end of the line and followed by a
system reboot for settings to take effect.