Use & Care Guide

www.USPconnectors.com
e-mail: [e-mail]
© Copyright 2005 United Steel Products Company
203
Miscellaneous
USP979-051
Protection Plates – ICPL58, ID4, KNS1, & PL4
Easy-to-install plates protect plumbing and
power/communication wiring from nail or screw
penetration.
ICPL58 & ID4 – Installs with nails.
KNS1 & PL4 – Prongs allow for quick installation.
Materials: 16 gauge
Finish: Galvanized
Options: ICPL58 is
available in Triple Zinc.
To order, add TZ, to stock number,
as in ICPL58-TZ.
Installation:
• Use all specified fasteners. See General Notes,
page 14.
• 16 gauge steel conforms to protection shield plate
requirements of the National Electrical Code and
International Plumbing Code.
Bridging – BRN, G, MB16, & MBG series continued
Typical G & MBG
installation
Step 1
Step 2
H
W
Ref. No. W H
Fastener Schedule
1
ICPL58 PSPN58 1/16 8-1/16 5 (4) 8d or prongs
ID4 -- -- 1/16 1-3/8 4-1/4 (2) 8d
PL4 NS2 1/16 2 5 prongs
KNS1 NS1 1/16 1-1/2 3 prongs
Dimensions
USP
Stock No.
Steel
Thickness
H
H
W
W
ID4
KNS1
ICPL58
Typical ID4,
KNS1, & PL4
installation
Typical ICPL58
installation
PL4
H
W
Joist Size Ref. No. W L
2 x 8 G812 NC2X8-12 18 15/16 11-3/4 (1) 8d x 1-1/2 12
2 x 8 G816 NC2X8-16 18 15/16 15-9/16 (1) 8d x 1-1/2 16
2 x 8 G824 -- -- 18 1-5/16 23-1/2 (1) 8d x 1-1/2 24
2 x 10 G1024 NC2X10-24 18 1-5/16 24 (1) 8d x 1-1/2 24
2 x 12 G1224 NC2X12-24 18 1-5/16 24-3/4 (1) 8d x 1-1/2 24
2 x 14 G1416 NC2X14-16 18 15/16 18-7/16 (1) 8d x 1-1/2 16
2 x 14 G1424 NC2X14-24 18 1-5/16 25-5/8 (1) 8d x 1-1/2 24
2 x 16 G1616 NC2X16-16 18 15/16 19-5/8 (1) 8d x 1-1/2 16
2 x 16 G1624 NC2X16-24 18 15/16 26-5/8 (1) 8d x 1-1/2 24
2 x 8 - 10 - 12 MB16 -- -- 22 11/16 -- -- -- -- 16
2 x 8 MBG812 NCA2X8-12 22 15/16 11-3/4 (1) 8d x 1-1/2 12
2 x 8 MBG816 NCA2X8-16 22 15/16 15-9/16 (1) 8d x 1-1/2 16
2 x 8 MBG824 -- -- 22 1-5/16 23-1/2 (1) 8d x 1-1/2 24
2 x 10 MBG1012 NCA2X10-12 22 15/16 12-3/4 (1) 8d x 1-1/2 12
2 x 10 MBG1016 NCA2X10-16 22 15/16 16-5/16 (1) 8d x 1-1/2 16
2 x 10 MBG1024 -- -- 22 1-5/16 24 (1) 8d x 1-1/2 24
2 x 12 MBG1212 NCA2X12-12 22 15/16 14 (1) 8d x 1-1/2 12
2 x 12 MBG1216 NCA2X12-16 22 15/16 17-1/4 (1) 8d x 1-1/2 16
2 x 12 MBG1224 -- -- 22 1-5/16 24-3/4 (1) 8d x 1-1/2 24
2 x 14 MBG1412 -- -- 22 15/16 16 (1) 8d x 1-1/2 12
2 x 14 MBG1416 -- -- 22 15/16 18-7/16 (1) 8d x 1-1/2 16
2 x 14 MBG1424 -- -- 22 1-5/16 25-5/8 (1) 8d x 1-1/2 24
2 x 16 MBG1612 -- -- 22 15/16 17 (1) 8d x 1-1/2 12
2 x 16 MBG1616 -- -- 22 15/16 19-5/8 (1) 8d x 1-1/2 16
2 x 16 MBG1624 -- -- 22 15/16 26-5/8 (1) 8d x 1-1/2 24
1) 8d x 1-1/2 nails are 11 gauge (0.131˝ diameter) by 1-1/2˝ long.
2) Joist spacing is based on a 1-1/2˝ joist, consult USP regarding wider joist applications.
Joist
Spacing O.C.
2
USP
Stock No.
Steel
Gauge
Dimensions
Fastener
Schedule
1