56K PCI Faxmodem for Windows Installation Guide Windows XP, 2000, Me, 98, and 95 Operating Systems part number R24.0245.
Before You Begin Before you begin, we recommend you uninstall any other modems you have in your system and unplug all telephone cords connected to these modems. Refer to your old modem’s documentation for instructions. If you have an older U.S. Robotics modem, see the “Uninstalling a U.S. Robotics Modem” chapter in the manual that came with your older modem. Write the new U.S. Robotics modem’s serial number in the box below.
Step 2 Install the modem drivers. NOTE: If at any time during the installation you are prompted to select the location of your installation drivers, the following is the correct location on the Installation CD-ROM (assuming D: is your CD-ROM drive). Windows XP/2000/Me/98/95 drivers: D:\Drivers NOTE: Windows XP/2000 users must be logged in using an account with administrative privileges before attempting to install the modem drivers. Windows XP home users have administrative privileges by default.
Windows 95 Users Turn on your computer. Insert your Installation CDROM into your drive before Windows opens. When the Add New Hardware Wizard appears, click Next Next. If the Wizard is unable to locate the driver, click Other Locations Locations. Click Browse and select your CD-ROM drive. Select Drivers and click OK OK. Click OK on the Select Other Location window. Click Finish Finish. At this point you may get an Insert Disk notice. Click OK OK. The Copying Files screen will open.
If you have Windows Me/98/95 Click Windows Start Start, Settings, and then Control Panel Panel. Double-click the Modems icon. In the Modems Properties screen, you should see a description for your modem, U.S. Robotics V.92 Fax Win Int. If you do not see a description of your modem, see the Note after this section. If you do see the description, click the Diagnostics tab. Make sure that the correct COM Port (modem) is highlighted. Click the More Info button.
Troubleshooting Having trouble with your modem? Try these basic troubleshooting steps first. 1) Is your phone cord properly connected? The phone cord should be plugged into the jack on the modem and into the wall phone jack. Use the phone cord included in your modem’s box. 2) Is your modem properly installed in your computer? Refer to the “Verify that the modem is properly installed” section of this Installation Guide for possible solutions based on your particular operating system.
Problem: My modem won’t dial out or doesn’t answer incoming calls. FOR BOTH DIALING AND ANSWERING PROBLEMS: Possible solution: You may have a bad phone cord connection to your modem, or your phone cord may be plugged into the wrong jack. The phone cord should be plugged into the • The server you’re dialing in to must support and provide a digital V.92 or V.90 signal. Your ISP can provide you with a list of dial-up connections and information on what those connections currently support.
Support Resources If you have not fixed your problem after trying the suggestions in the “Troubleshooting” section, you can receive additional help via one of these convenient resources: World Wide Web Contains useful product information, documents, and manuals. Log on to: http://www.usr.com/support Internet FTP ftp://ftp.usr.
other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.) In order to program this information into your modem, refer to the BVRP software on the CD-ROM that shipped with your modem. If you are using a different communication software program, refer to its manual. Radio and Television Interference: This equipment generates, uses, and can radiate radio frequency energy.
the media containing software against failure during the warranty period. No updates are provided. U.S. Robotics’ sole obligation under this express warranty shall be, at U.S. Robotics’ option and expense, to refund the purchase price paid by Customer for any defective software product, or to replace any defective media with software which substantially conforms to applicable U.S. Robotics published specifications.
CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OTHER HAZARDS, OR ACTS OF GOD. LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW, U.S.
