Service manual

Maintenance
Description
item No.
2DA/2DB
1-4-36
U249 Checking the paper ejection to optional devices
Description
Ejects paper to an optional job separator.
Purpose
To check paper conveying operation to optional job separator.
Method
1. While pressing the feedshift switch by your hand, press the start key. Paper transfer operation starts.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U250 Setting the maintenance cycle
Description
Displays and changes the maintenance cycle.
Purpose
To check and change the maintenance cycle.
Method
Press the start key. The current setting is displayed.
Setting
1. Change the setting using the numeric keys. To clear, press the reset key.
Description Setting range Initial setting
Maintenance cycle 0 to 9999999 150000
2. Press the start key. The value is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.