Service manual

2DA/2DB
1-4-47
Maintenance
Description
item No.
U904 Checking/clearing the service call counts
Description
Displays or clears the service call code counts by types.
Purpose
To check the service call code status by types. Also to clear the service call code counts after replacing
consumable parts.
Start
1. Press the start key. The screen for selecting an item is displayed.
2. Select the item using the up/down cursor keys.
3. Press the start key. The code by type is displayed.
Display Description
COUNT Displays/clears the service call code counts
TOTAL COUNT Displays the total service call code counts
Method: Displays/clears the service call code counts
1. Select the code to be cleared using the up/down cursor keys.
Change the screen using the left/right cursor keys. Select the counts for all service call codes and select
the ALL.
2. Press the start key. The count is cleared.
Method: Displays the total service call code counts
1. Change the screen using the left/right cursor keys.
The total number of service call code count cannot be cleared.
2. To return to the screen for selecting an item, press the stop/clear key.
Completion
To exit this maintenance item without changing the count, press the stop/clear key. The screen for selecting a
maintenance No. item is displayed.
U905 Checking counts by optional devices
Description
Displays the counts of the optional DP or finisher.
Purpose
To check the use of the DP and finisher.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the device using the up/down cursor keys, the count of which is to be checked and press the start
key. The count of the selected device is displayed.
•DP
Display Description
ADP No. of single-sided originals that has passed through the DP in ADP mode
RADP No. of double-sided originals that has passed through the DP in RADP mode
• Finisher
Display Description
CP CNT No. of copies that has passed
STAPLE Frequency the stapler has been activated
BUNDLE EJECT Frequency the bundle discharge has been activated
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No. is
displayed.