Service manual

2DA/2DB-1
1-4-60
(5) Bypass setting
Paper size and type
Sets the paper size and paper type for the
bypass settings.
When using special papers such as transparency,
cards, and postcards, be sure to set the paper
type to prevent faulty transfer and faulty fixing.
1. Select paper size.
If the paper size is unknown or no particular
paper size setting is required, select
[Universal Size].
When setting a size, turn on the size input
and use the left/right cursor key to select the
paper size.
Setting range:
(Inch specifications)
Width: 3
7
/
8
" to 11
5
/
8
"
Length: 5
7
/
8
" to 17"
(Metric specifications)
Width: 98 to 297 mm
Length: 148 to 432 mm
2. Press the enter key.
3. Select paper type and then press the enter
key.
Selecting other standard sizes
Sets a special standard size.
1. Select [Other Regular Size] and then press
the enter key.
2. Select paper size and then press the enter
key.
3. Select paper type and then press the enter
key.
(6) Checking the total counter and printing out the
counter report
Checks the total count of copies, etc., and prints
out the information as a counter report.
1. Select [Counter check] and then press the
enter key.
2. Select [Output count] or [Scan count] and
then press the enter key.
3. Select [End] and then press the enter key.
4. Select [Print counter report] and then press
the enter key to print out a counter report.
(7) Status report print out
Prints out one of the status report.
1. Select [Print Report] and then press the enter
key.
2. Select the report to print out and then press
the enter key.
[Copy report]
[Machine report]
[Coverage report]
The selected status report will be printed out.
(8) Language selection function
Switches the language to be displayed on the
operation panel.
1. Select [Language] and then press the enter
key.
2. Select the language to use and then press
the enter key.
Available languages:
Inch specifications
Japanese, English, French and Spanish
Metric specifications
English, German, French, Spanish and Italian