Service manual

2DA/2DB
1-5-9
Problem Causes/check procedures Corrective measures
(6)
A paper jam in the
paper feed section
is indicated during
copying (no paper
feed from the
drawer 4).
Jam code 14
(7)
A paper jam in the
paper feed section
is indicated during
copying (misfeed in
vertical paper con-
veying 1).
Jam code 15
Defective drawer feed
switch 2*
1
.
Check if the drawer paper
feed clutch 3*
1
malfunc-
tions.
Electrical problem with the
drawer paper feed clutch
3*
1
.
Broken registration switch
actuator.
Defective registration
switch.
Broken drawer feed switch
1*
2
actuator.
Defective drawer feed
switch 1*
2
.
Broken drawer feed switch
2*
1
actuator.
Defective drawer feed
switch 2*
1
.
Check if the paper feed
clutch malfunctions.
Electrical problem with the
paper feed clutch.
Check if the drawer paper
feed clutch 1*
2
malfunc-
tions.
Electrical problem with the
drawer paper feed clutch
1*
2
.
Check if the drawer paper
feed clutch 2*
1
malfunc-
tions.
Electrical problem with the
drawer paper feed clutch
2*
1
.
Check if the drawer paper
feed clutch 3*
1
malfunc-
tions.
Electrical problem with the
drawer paper feed clutch
3*
1
.
Run maintenance item U031 and turn drawer feed switch 2 on
and off manually. Replace drawer feed switch 2 if indication of
the corresponding switch is not light.
Run maintenance item U032 and select the drawer paper feed
clutch 3 to be turned on and off. Check the status and remedy if
necessary.
Check.
Check visually and replace registration switch if its actuator is
broken.
Run maintenance item U031 and turn registration switch on and
off manually. Replace registration switch if indication of the cor-
responding switch is not light.
Check visually and replace drawer feed switch 1 if its actuator is
broken.
Run maintenance item U031 and turn drawer feed switch 1 on
and off manually. Replace drawer feed switch 1 if indication of
the corresponding switch is not light.
Check visually and replace drawer feed switch 2 if its actuator is
broken.
Run maintenance item U031 and turn drawer feed switch 2 on
and off manually. Replace drawer feed switch 2 if indication of
the corresponding switch is not light.
Run maintenance item U032 and select the paper feed clutch to
be turned on and off. Check the status and remedy if necessary.
Check (see page 1-5-35).
Run maintenance item U032 and select the drawer paper feed
clutch 1 to be turned on and off. Check the status and remedy if
necessary.
Check.
Run maintenance item U032 and select the drawer paper feed
clutch 2 to be turned on and off. Check the status and remedy if
necessary.
Check.
Run maintenance item U032 and select the drawer paper feed
clutch 3 to be turned on and off. Check the status and remedy if
necessary.
Check.
*1: Optional. *2: Optional for 16 ppm model. Standard for 20 ppm model.