Service manual

2DA/2DB
1-6-6
7. Remove the springs, stop ring and bushing
and then the shaft holder from the upper
paper feed unit.
8. Remove the forwarding pulley from the upper
paper feed unit.
9. Remove the paper feed pulley from the upper
paper feed unit.
10. Replace the forwarding pulley and paper feed
pulley and refit all the removed parts.
Upper paper feed unit
Bushing
Stop ring
Shaft holder
Spring
Spring
Forwardin
g
p
ulle
y
Paper feed pulley
Figure 1-6-8
Figure 1-6-9