Service manual

2DA/2DB

1-6-15

(9) Detaching and refitting the registration cleaner

Follow the procedure below to replace the registration cleaner.

Procedure

1. Remove the drum unit (see page 1-6-38).

2. Remove the screw and then the registration

guide.

(8) Detaching and refitting the registration left roller

Follow the procedure below to replace the registration left roller.

Procedure

1. Remove the paper conveying unit (see page

1-6-11).

2. Remove the transfer roller (see page 1-6-42).

3. Release the stoppers at the front and rear

side, and then remove the registration left

roller from the paper conveying unit.

4. Replace the registration left roller and refit all

the removed parts.

3. Remove the screw and then the registration

cleaner.

4. Replace the registration cleaner and refit all

the removed parts.

istration left roller

Stopper

Paper conveying unit

Registration guide

Trans guide film

Registration cleaner

Figure 1-6-30

Figure 1-6-29

Figure 1-6-28