Service manual

2DA/2DB

1-6-40

(3) Detaching and refitting the main charger unit

Follow the procedure below to replace the main charger unit.

Procedure

1. Open the front cover and remove the waste

toner box and inner cover.

2. While lifting the main charger unit toward the

upper right, remove the unit from the MFP.

3. While pressing the main charger release

lever in the direction indicated by the arrow at

the removal stopper position to release the

removal stopper, remove the main charger

unit from the MFP.

4. Replace the main charger unit and refit all the

removed parts.

Main char

er unit

Main charger

release lever

Figure 1-6-72