Service manual

2DA/2DB-1

1-6-48

(5) Detaching and refitting the heat roller

Follow the procedure below to replace the heat roller.

Procedure

1. Remove the fixing unit and separate the fixing

right unit and left unit (see pages 1-6-43, 45).

2. Remove the heat roller separation claws.

(see page 1-6-47).

3. Pull out the heat roller bushing from the fixing

left unit and then remove the heat roller.

4. Replace the heat roller and refit all the

removed parts.

Fixing left unit

Heat roller

Heat roller bushing

Figure 1-6-87