Service manual

2DA/2DB-1
1-6-49
(7) Detaching and refitting the fixing thermistor
Follow the procedure below to replace the fixing thermistor.
Procedure
1. Remove the fixing unit and separate the fixing
right unit and left unit (see pages 1-6-43, 45).
2. Remove the heat roller (see page 1-6-48).
3. Remove the screw holding the fixing
thermistor and then the thermistor.
4. Replace the fixing thermistor and refit all the
removed parts.
(6) Detaching and refitting the fixing thermostat
Follow the procedure below to replace the fixing thermostat.
Procedure
1. Remove the fixing unit and separate the fixing
right unit and left unit (see pages 1-6-43, 45).
2. Remove the heat roller (see page 1-6-48).
3. Remove the two screws holding the fixing
thermostat and then the thermostat.
4. Replace the fixing thermostat and refit all the
removed parts.
Fixing thermostat
Fixing thermistor
Figure 1-6-89
Figure 1-6-88