Service manual

1-3-6
2DA/2DB
Output an own-status report (maintenance item U000).
1. Enter “000” using the numeric keys and press the
start key.
2. Select “MAINTENANCE” and press the start key
to output a list of the current settings of the
maintenance items.
3. Press the stop/clear key.
1. Enter “001” using the numeric keys and press the
start key.
The machine exits the maintenance mode.
Exit maintenance mode.
1. Place an original and make test copies.
Make test copies.
End of installation.
1-3-2 Setting initial copy modes
Factory settings are as follows:
Maintenance
item No.
Contents
Factory setting
U253
U254
U258
U260
U264
U277
U326
U342
U343
U344
Switching between double and single counts
Turning auto start function on/off
Switching copy operation at toner
empty detection
Changing the copy count timing
Setting the display order of the date
Setting auto aplication change time
Setting the black line cleaning indication
Setting the ejection restriction
Switching between duplex/simplex copy mode
Setting preheat/energy saver mode
Double count
ON
SINGLE MODE
After ejection
Month/Day/Year (Inch specifications)
Day/Month/Year (Inch specifications)
30
ON
ON
OFF
ENERGY STAR