Service manual

1-3-7

2DA/2DB-1

1-3-3 Installing the paper feeder (option)

1. Place the MFP on the paper feeder by aligning the

positioning insertion sections of the MFP with the

positioning pins at the rear part of the paper feeder.

* When placing the MFP, take care not to hit the

MFP against the drawer, the pins or ground plate of

the paper feeder.

For stacking paper feeders for use:

Stack a paper feeder on another paper feeder by

aligning the positioning insertion sections of the first

paper feeder with the positioning pins at the rear

part of the second paper feeder.

(For 16 ppm model, three paper feeders can be added.

For 20 ppm model, two paper feeders can be added.)

2. If a type of paper that is not included in the

specifications for the standard sheet cassette size is

used, replace the cassette size sheet indication with

the supplied one.

3. Insert the MFP power plug into the wall outlet and

turn the power switch on.

Load paper in the drawer and make test copies to

check the operation.

Figure 1-3-5

Figure 1-3-6

Figure 1-3-7

Paper feeder

Positioning pins

Positioning

pins

Positioning

pins

Cassette size

sheet indication