Service manual

1-3-13

2DA/2DB

Figure 1-3-20

Figure 1-3-21

Figure 1-3-19

1-3-5 Installing the duplex unit (option)

Left cover

Strap

Stop

ring

Fitting projection

Stopper

Wire guide section

lex unit

Axis section

1. Open the left cover.

2. Remove the stop ring and the strap from the rear

side.

3. Restore the conveyor section.

4. Remove the fitting projection and pin, and then

remove the stopper from the front side.

5. Open the left cover until it is put horizontally.

6. Turn the wire guide section of the duplex unit in the

direction indicated by the arrow.

7. Insert the axis sections of the duplex unit into the U-

shape grooves of the conveyer unit.