Service manual

1-3-16
2DA/2DB-1
1-3-6 Installing the drawer heater (option)
Drawer heater installation requires the following parts:
• Drawer heater (P/N 120 V specifications: 2C960030, 220-240 V specifications: 2C960040)
• One (1) M4 × 10 tap-tight S binding screw (P/N B3024100)
<Procedure>
1. Remove the main body from the paper feeder (see
page 1-6-7).
2. Remove the right cover. Pull out the drawer.
3. Remove the three screws and then the front right
cover.
Figure 1-3-27
Front right cover