Service manual

1-3-26

2DA/2DB

Attach the intermediate tray.

12. Loosen the screw located inside of the MFP by about

3 turns.

* Do not turn the screw too much, otherwise it may

drop in the machine.

13. Hang the hook of the hook holder onto the screw and

then retighten the screw.

14. Insert the intermediate tray from the front side of the

MFP while pushing the hook to the back and then

push the pin located at the right rear side of the

intermediate tray into the hook holder until the fitting

sound is heard.

Screw

Hook holder

Intermediate

tray

Hook

holder

Figure 1-3-45

Figure 1-3-46