Service manual

1-3-44
2DA/2DB
Install the shield cover.
5. Insert the lower part of the shield cover that has been
removed by Procedure 1 into the shield box and refit
it to its original position using the six screws (a).
If the fax system is installed, refit the shield cover
using the six screws (a) and screw (b) to its original
position.
Screw (a)
Shield cover
Screws (a)
Screw (b)
Screw (a)
Screw (a)
Lower part
Shield box
Figure 1-3-89