Service manual

Section

Item

Maintenance item contents

Initial

No. setting*

2DA/2DB-1

1-4-4

U344 Setting preheat/energy saver mode Inch

specifications:

ENERGY STAR

Metric

specifications:

GEEA

U345 Setting the value for maintenance due indication —

U402 Adjusting margins of image printing 3.0/3.0/4.0

U403 Adjusting margins for scanning an original on the contact glass 2.0/3.0/2.0/2.0

U404 Adjusting margins for scanning an original from the DP 2.0/3.0/2.0/2.0

U407 Adjusting the leading edge registration for memory image printing 0.0

U504 Initializing the scanner NIC —

U506 Setting the time out 10

U901 Checking/clearing copy counts by paper feed locations —

U903 Checking/clearing the paper jam counts —

U904 Checking/clearing the service call counts —

U905 Checking counts by optional devices —

U906 Resetting partial operation control —

U908 Changing the total counter value —

U910 Clearing the black ratio data —

U911 Checking/clearing copy counts by paper sizes —

U917 Setting backup data reading/writing —

U920 Checking the accounting counts —

U925 Checking/clearing the system error counts —

U926 Rewriting FAX program —

U927 Clearing the all accounting counts and machine life counts —

U928 Checking machine life counts —

U941 Setting the default magnification ratio of the default drawer —

U942 Adjusting the DP amount of slack in the original 0

U990 Checking/clearing the time for the exposure lamp to light —

U991 Checking the scanner count —

U993 Outputting a VTC-PG pattern —

* Initial setting for executing maintenance item U020

Mode setting

Image

processing

Network

scanner

Others